East Riding of Yorkshire · England

Bath & shower resealing (mastic) in Flinton, East Riding of Yorkshire

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Flinton and across East Riding of Yorkshire. Send photos for a free, fixed quote.

  • Old sealant that looks dirty
  • Mould you can’t clean out
  • Unsealed corners
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Flinton?

What we do, step by step

Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It typically takes around two hours, and you are welcome to carry on with your day while we work.

  1. First we strip out every bit of the old mastic.
  2. Next we clean the joint and deal with mould.
  3. We dry the joint thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Tell us if there are stairs or a lift
  • Keep a parking space free if you can

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed quote.

Get a fixed price

Read more

Bath resealing in Flinton, done in place

All of the old sealant is cut out, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. If you’re dealing with silicone coming away from the tiles and unsealed corners, we can usually put it right, on baths, kitchen worktops & sinks and wet rooms alike.

You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Where
Flinton (HU11)
Region
East Riding of Yorkshire
Warranty
A year, on every repair
Price
Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Landlord and trade work in Flinton

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

About Flinton

Flinton is about 8 miles east of Kingston upon Hull, in East Riding of Yorkshire. We visit homes and businesses in Flinton, so there’s no workshop to go to. Flinton is one of 299 towns and villages in East Riding of Yorkshire we cover. You can also see our page for Leeds, about 57 miles away.

We cover every part of HU11 and the streets around it. Other places close to Flinton include Tansterne (1 mile north), Etherdwick (1 mile north-east), West Newton (2 miles north-west), Aldbrough (2 miles north-east) and Withernwick (3 miles north-west). Larger places within reach include Beverley (12 miles west), Hessle (13 miles south-west), Cottingham (11 miles west), Hornsea (7 miles north), Hedon (5 miles south) and Anlaby (12 miles west).

Local landmarks in Flinton

Typical jobs here are in homes near Church of Saint Peter. A little further out are Princess Royal Hospital (5.7 miles west) and Aldbrough Castle (2.2 miles north-east).

Map of Flinton © OpenStreetMap contributors

Flinton questions

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What happens if you find more damage?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

How long does resealing take?

Most reseals take about two hours. It then needs time to cure.

Can pets and children be at home?

Just keep them out of the work area. We will let you know when it’s safe to use again.

My seal keeps tearing. Why?

Something is moving. If it keeps happening, the support may need fixing.

Looking after it afterwards

Much of the damage we repair could have been avoided. These habits help:

  • Run the extractor fan during and after showers
  • Reseal when black spots won’t clean off
  • Give the seal a regular clean
  • Store bottles on a shelf

Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.

Black mould in sealant is not just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

What we can’t put right

We won’t take on work that will not last, so here’s what a repair cannot put right:

  • Water damage behind the bath that needs a builder
  • A bath or tray that moves, until its support is fixed
  • Gaps so wide they need filling or trims before sealing

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Baths
  • Basins & vanity units
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Wet rooms

Do you need bath resealing in Flinton?

In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.

Typical reasons for a call-out include:

  • Silicone coming away from the tiles
  • An untidy old seal
  • Gaps by the taps
  • Black spots in the silicone

What your quote should include

  • Aftercare advice
  • How the colour is matched
  • Who turns up on the day
  • What prep work is covered

Our hiring checklist

Repairs by material

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Baths

We fill the bath before sealing, to open the joint fully.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

Resealing in Flinton: why it matters

Putting new silicone over old does not last. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Straight answers about what a repair can do
  • Same prices wherever you are
  • Typically one visit, start to finish
  • CHAS, Constructionline and SafeContractor accredited

Read our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.