Herefordshire · England
Bath & shower resealing (mastic) in Ford, Herefordshire
We travel to Ford for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Leaks at the edges
- Mould you can’t clean out
- Gaps by the taps
How we handle bath resealing in Ford
We cut out all of the old sealant, deal with any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Typical jobs include old sealant that looks dirty and water getting behind the bath or tray, across wet rooms, kitchen worktops & sinks and basins & vanity units.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Ford (HR6)
- Region
- Herefordshire
- Cover
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
How it works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a couple of hours, and we finish by cleaning up and talking you through the result.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
- Tell us about parking, stairs or access
Ask for a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Tiles that move, until they’re refixed
- A flexing bath
- Gaps so wide they need filling or trims before sealing
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Wet rooms
- Kitchen worktops & sinks
More services for Ford
What bath resealing costs
There’s no area surcharge for Ford. What changes the price is:
- How hard the colour is to match
- The material
- How easy the damage is to reach
- Any earlier repairs that need removing first
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
We price nearly every job from pictures. This is what to send:
- One sharp close-up of the damage
- Where you are, by postcode
- Something in shot to show the size
- Any details about the material
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- One-year guarantee on every repair
- Straight answers about what a repair can do
- A fixed quote before you book
- Technicians who travel to you, UK-wide
Read our full price list.
Covering Ford
Ford is about 9 miles north of Hereford, in Herefordshire. Customers in Ford get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We work in 255 places across Herefordshire. Our nearest city page is Birmingham, about 40 miles away.
We cover every part of the HR6 postcode area and the streets around it. If you’re just outside Ford, we cover Marlbrook (1 mile south), Wharton (1 mile north), Newton (1 mile south), Hope under Dinmore (1 mile south) and Wellington (4 miles south). Within a short drive, we also cover Hereford (9 miles south), Leominster (3 miles north), Redhill (10 miles south), Newton Farm (10 miles south), Whitecross (9 miles south) and Eign Hill (10 miles south).
Around Ford
Around Ford, we work in homes near Church of St John of Jerusalem and Earl Mortimer College. For rail, the closest station is Leominster station, about 2.4 miles north of the centre. A little further out are Hampton Castle (1.8 miles south) and Leominster (2.2 miles north-west). The countryside around Ford includes Dinmore Hill.
Common problems we fix in Ford
Most reseals are because of black mould. It grows into the sealant itself, so cleaning cannot get it all out.
People normally call us when they notice something like this:
- Black mould in the sealant
- Gaps in the seal
- Water getting behind the bath or tray
- Unsealed corners
Questions to ask before you book
- How long it needs to cure
- What happens if they find more damage
- What aftercare is recommended
- Whether they match the colour on site
Questions from Ford
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Ford.
How long will it take?
A bath or shower usually takes a couple of hours. It then needs time to cure.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Why does mould come back so fast?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How to care for the repair
To keep it looking its best for years:
- Run the extractor fan during and after showers
- Reseal when black spots won’t clean off
- Keep bottles off the joints
- Dry the seal after bathing
Good ventilation is the best protection, and dry the joints after bathing.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
