Wiltshire · England

Bath & shower resealing (mastic) in Ford, Wiltshire

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Ford and across Wiltshire. Send photos for a free, fixed quote.

  • Gaps by the taps
  • Mould you cannot clean out
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Ford

What affects the price in Ford

We give every job a fixed price from pictures. These are the things that affect it:

  • Access to the area
  • The material and finish
  • The size and number of damaged areas
  • The type of damage

We charge the same wherever you are, so there’s no premium for Ford. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed price

Almost every job we do is priced from pictures. This is what we need:

  • Natural light rather than flash
  • The postcode, so we can plan the visit
  • One picture of the whole bath or shower
  • The material, if you know it

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Bath resealing in Ford without replacing anything

We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We work on basins & vanity units, wet rooms and kitchen worktops & sinks, and people most frequently call us about water getting behind the bath or tray and missing sealant behind the taps.

Big or small, it’s backed by a one-year guarantee in Ford and across Wiltshire.

Where
Ford (SN14)
Region
Wiltshire
Warranty
One year on every repair
Quote
Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Resealing in Ford: why it matters

Resealing is a small job. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why choose Surface Doctor in Ford

  • Work done at your home or business
  • CHAS and Constructionline accredited
  • Usually one visit, start to finish
  • Every repair guaranteed for a year

See our prices page.

Repairs by material

Shower trays

We put weight on a tray before sealing it, for the same reason.

Baths

Baths are resealed with water in them, to open the joint fully.

Landlord and trade work in Ford

If you manage property in Ford, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Common questions in Ford

How long does a reseal take?

Typically a couple of hours, then it needs to cure.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Can landlords book you?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Do the materials smell?

Expect a mild smell while we’re working.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Dry the seal after bathing
  • Ventilate the bathroom well
  • Clean the sealant gently and regularly
  • Don’t stand toiletries on the seal

Keep the room well ventilated, and wipe the joints after use to keep mould away.

Black mould in sealant is not just unsightly. Resealing early keeps water out of the walls and floor.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

When we’d advise against a repair

Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:

  • Rotten walls or floors behind the bath
  • A flexing bath
  • Gaps so wide they need filling or trims before sealing

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Wet rooms
  • Baths
  • Basins & vanity units
  • Shower trays & enclosures
  • Kitchen worktops & sinks

The process

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a couple of hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Mention if the room is upstairs or in a flat
  • Ensure the area is dry

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, include your postcode and send them over. You’ll get a fixed price, not an estimate.

Get a free quote

Advice

Ford and nearby

Ford is about 3 miles north-west of Corsham, in Wiltshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Ford is one of 425 places in Wiltshire where we work. You can also see our page for Birmingham, about 70 miles away.

Jobs in SN14 are booked in the same way as anywhere else. Other places close to Ford include Slaughterford (1 mile south), Castle Combe (1 mile north), Biddestone (1 mile south-east), Upper Castle Combe (2 miles north) and Thickwood (2 miles south-west). Larger places within reach include Trowbridge (11 miles south), Chippenham (5 miles east), Calne (10 miles east), Devizes (13 miles south-east), Westbury (15 miles south) and Melksham (8 miles south-east).

What’s near Ford

We visit homes around Church of St John, among other places. For rail, the closest station is Chippenham station, about 4.9 miles east. Well-known places in the area include Chippenham Community Hospital (4.6 miles east) and Castle Combe Museum (1.5 miles north). The countryside around Ford includes Vincients Wood.

Map of Ford © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.