Isle of Anglesey · Wales
Bath & shower resealing (mastic) in Fryars Bay, Isle of Anglesey
Our technicians come to Fryars Bay for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Water getting behind the bath or tray
- Mould you cannot clean out
- Missing sealant behind the taps
About Fryars Bay
Fryars Bay is about 5 miles north-east of Bangor, in Isle of Anglesey. We travel to homes and businesses in Fryars Bay, so there’s no workshop to go to. Fryars Bay is one of 115 towns and villages in Isle of Anglesey where we work. Our nearest city page is Liverpool, about 49 miles away.
Here we cover the LL58 postcode area. Neighbouring places we cover include Llanfaes (1 mile south), Llangoed (1 mile north), Sling (1 mile south-west), Beaumaris (2 miles south) and Llanddona (2 miles west). Further out, we also cover Llangefni (9 miles west), Menai Bridge (5 miles south-west), Porthaethwy (5 miles south-west), Amlwch (14 miles north-west), Llanfair Pwllgwyngyll (6 miles south-west) and Benllech (6 miles west).
Around Fryars Bay
Our customers here include homes close to Tafarn y Rhyd pub, St Catherine's Church and Ysgol Gynradd Llangoed and the streets around them. The closest station to Fryars Bay is Bangor (Gwynedd) station, about 4.7 miles south-west of the centre. Well-known places in the area include Haulfre Stables (0.8 miles north) and Bryn y Neuadd Hospital (4.8 miles south-east). For a walk, there is Llyn Bodgylched and Bwrdd Arthur.
Bath resealing at your home in Fryars Bay
Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours. If you are dealing with old sealant that looks dirty and missing sealant behind the taps, we can usually put it right, whatever the material.
Big or small, you get the same one-year guarantee.
- Where
- Fryars Bay (LL58)
- County
- Isle of Anglesey
- Guarantee
- One year on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath resealing in Fryars Bay
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Do you cover the entire of Isle of Anglesey?
The whole UK, including all of Isle of Anglesey. Send your postcode with your pictures and we’ll offer you dates.
How long does resealing take?
A bath or shower normally takes a couple of hours. It then needs time to cure.
Is a repair better than a new one?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Prices and what affects them
There is no area surcharge for Fryars Bay. The price reflects:
- The material and finish
- How hard the colour is to match
- How many areas need work
- How easy the damage is to reach
We charge the same wherever you are, so there’s no premium for Fryars Bay. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- One sharp close-up of the damage
Email us pictures of the damage and one of the entire item, and tell us you are in Fryars Bay, and we will reply with a fixed quote.
Common problems we fix in Fryars Bay
Most reseals are because of black mould. It grows into the silicone, so cleaning cannot get it all out.
These are the problems we are asked about most:
- Water getting behind the bath or tray
- Gaps in the seal
- Silicone smeared on tiles
- Mould you cannot clean out
What to look for in a quote
- Whether they match the colour on site
- What happens if the damage is worse than the photos show
- What aftercare is recommended
- If travel is included in the price
What else we do in Fryars Bay
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Store bottles on a shelf
- Run the extractor fan during and after showers
- Reseal when black spots won’t clean off
- Clean the sealant gently and regularly
Avoid scraping the joints, and keep shampoo bottles off the joints.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes around two hours, and we finish by cleaning up and talking you through the result.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
Getting a price
If you’re in Fryars Bay and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
When we would advise against a repair
A repair isn’t right for every job, including:
- Hollow or loose tiles
- Hidden water damage
- Movement in the bath or tray
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Baths
Baths are resealed with water in them, to open the joint fully.
About our accreditations · Every repair comes with a one-year guarantee.
