Isle of Anglesey · Wales
Shower Tray Repair in Fryars Bay
Shower tray chip, crack and scratch repairs and resurfacing for homeowners, landlords and businesses in Fryars Bay. Free, fixed quotes from your photos.
- Repairs from £95
- Edge chips from dropped bottles
- Cracks running from the waste
Shower tray repair in Fryars Bay without replacing anything
If the entire tray looks tired, we can resurface it, giving it a fresh, even finish. If you’re dealing with a damaged area around the waste and a tray that creaks or moves underfoot, we can help.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Fryars Bay (LL58)
- Region
- Isle of Anglesey
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about shower tray repair in Fryars Bay
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can a cracked shower tray be repaired?
Typically, as long as it doesn’t flex. We reinforce the crack, fill it and refinish the surface.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Fryars Bay as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
How it works
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, or most of a day for a full resurface, and we leave the room as we found it.
- First, we check whether the tray moves.
- We clean the damage and open it up so the repair can bond.
- Cracks are reinforced and the damage filled.
- The repair is shaped, colour matched and finished.
- We leave it to cure, normally until the following day.
Before we arrive
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
What we’re called out for in Fryars Bay
Trays crack mainly because they move: if a tray wasn’t bedded on a solid, even base, it flexes each time someone stands on it. Dropped bottles cause most chips.
These are the problems we’re asked about most:
- A crack across the base
- Chips caused during fitting
- A tray that flexes
- Staining and dullness across the tray
Comparing quotes
- How your room will be protected
- If travel is included in the price
- Whether the colour is mixed to match
- How to look after the finish
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Don’t ignore a tray that flexes
- Stick to gentle cleaners
- Replace failing sealant promptly
- Ventilate the room after showers
Wait the full curing time before you shower. After that, gentle cleaning and good ventilation keep it in good shape.
Stop using the shower if the tray is cracked. Water can get through to the floor and walls, and the damage below is not visible.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
When we’d advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- A tray that flexes because it was never properly supported
- Water damage to the floor beneath the tray
- Trays cracked in several places
Send us pictures and we will tell you honestly.
Materials we repair
- Cast iron
- Enamelled steel
- Acrylic
- Stone resin
- Ceramic
Different materials, different repairs
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. They need a flat, solid base, and repairs are matched to the gel coat.
Acrylic
Acrylic trays are lighter and slightly flexible, so a firm base is essential. We repair cracks and scratches.
What shower tray repair costs
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- How easy the damage is to reach
- What the surface is made of
- Doing more than one item at once
- The colour and finish to match
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- The material, if you know it
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
More services for Fryars Bay
Where we work around Fryars Bay
Fryars Bay is about 5 miles north-east of Bangor, in Isle of Anglesey. Whether you’re in the middle of Fryars Bay or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 115 towns and villages across Isle of Anglesey. You can also see our page for Liverpool, about 49 miles away.
Postcode districts we cover here: LL58. We also cover the places around Fryars Bay: Llanfaes (1 mile south), Llangoed (1 mile north), Sling (1 mile south-west), Beaumaris (2 miles south) and Llanddona (2 miles west). We also work in nearby towns such as Llangefni (9 miles west), Menai Bridge (5 miles south-west), Porthaethwy (5 miles south-west), Amlwch (14 miles north-west), Llanfair Pwllgwyngyll (6 miles south-west) and Benllech (6 miles west).
Near you in Fryars Bay
We visit homes around Tafarn y Rhyd pub, St Catherine's Church and Ysgol Gynradd Llangoed, among other places. Fryars Bay’s nearest station is Bangor (Gwynedd) station, roughly 4.7 miles south-west of the centre. A little further out are Haulfre Stables (0.8 miles north) and Bryn y Neuadd Hospital (4.8 miles south-east). Green spaces nearby include Llyn Bodgylched and Bwrdd Arthur.
About our accreditations · Every repair comes with a one-year guarantee.
