East Ayrshire · Scotland

Bath & shower resealing (mastic) in Galston, East Ayrshire

Bath resealing for Galston, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Black mould in the sealant
  • A messy previous reseal
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Galston

Landlords, agents and businesses in Galston

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

About our bath resealing in Galston

We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. Most jobs take a couple of hours, then it needs to cure. Typical jobs include leaks at the edges and gaps by the taps, on basins & vanity units, baths and wet rooms.

Your repair is guaranteed for a year, as with every job we do.

Location
Galston (KA4)
Region
East Ayrshire
Guarantee
A year, on every repair
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

When we would advise against a repair

Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:

  • A bath or tray that moves, until its support is fixed
  • Tiles that move, until they’re refixed
  • Hidden water damage

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms
  • Kitchen worktops & sinks

Common problems we fix in Galston

Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.

You may need us if you’ve spotted any of these:

  • Silicone coming away from the tiles
  • A messy previous reseal
  • Unsealed corners
  • Stained silicone

Comparing quotes

  • What protection goes down before work starts
  • Whether there are any call-out or travel charges
  • Is the price fixed, and does it include VAT?
  • What preparation is included

10 questions to ask before you book

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Your questions about bath resealing in Galston

Can you redo someone else’s repair?

Yes, we often do. Removing the old work can add time, and that is in the quote.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

What happens if you find more damage?

The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How long does a reseal take?

Usually a couple of hours, then it needs to cure.

How we price bath resealing

There is no charge for travel to Galston. The price comes down to:

  • Doing more than one item at once
  • Whether old repairs or coatings need taking off
  • Access to the area
  • How hard the colour is to match

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your pictures

Two or three clear photos are typically enough. Try to include:

  • What it’s made of, if you know
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area
  • Where you are, by postcode

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you’re under no obligation.

Repairs by material

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

About Galston

Galston is about 4 miles east of Kilmarnock, in East Ayrshire. From the centre of Galston to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 53 places across East Ayrshire. Our jobs stretch from Galston to Glasgow (18 miles away).

Here we cover the KA4 postcode area. Jobs here include addresses on Station Road, New Road and Andrew Lundie Place. Galston sits on or near the A71 and A719, so getting to you is simple. Neighbouring places we cover include Newmilns (2 miles east), Moscow (3 miles north), Hurlford (3 miles west), Crookedholm (3 miles west) and New Farm Loch (4 miles west). Larger places within reach include Kilmarnock (4 miles west), Stewarton (8 miles north-west), Cumnock (11 miles south-east), Annanhill (5 miles west), Mauchline (6 miles south) and Bonnyton (5 miles west). Being one of East Ayrshire’s larger places, Galston is somewhere we visit frequently.

Landmarks near Galston

Typical jobs here are in homes near Church of Scotland and Loudoun Academy. The nearest railway station is Kilmarnock station, about 4.6 miles west of the centre. Other landmarks nearby include Barr Castle Museum (within half a mile east) and Barr Castle (under half a mile east).

Map of Galston © OpenStreetMap contributors

How it works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a couple of hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

Before we arrive

  • Tell us if there are stairs or a lift
  • Tell us about parking, stairs or access
  • Open a window if you can

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed price

Related advice

Why reseal now?

A reseal is one of the cheapest bathroom jobs there is, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. We charge the same wherever you are, with no extra for Galston. The job itself decides the price: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Galston

  • Usually one visit, start to finish
  • One price list for the entire UK
  • We’ll tell you if it’s not worth repairing
  • CHAS, Constructionline and SafeContractor accredited

See our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.