Cornwall · England

Bath Resealing for Goonvrea homes

Bath, shower and sink resealing with new mould-resistant silicone at your home in Goonvrea, with a one-year guarantee on every repair.

  • Stained silicone
  • Damp near the bath
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Goonvrea

Common questions in Goonvrea

Do you cover Goonvrea?

Yes. We cover the whole UK and come to Goonvrea and the rest of Cornwall. Send us pictures for a fixed quote, or call 0345 017 0787.

Is it safe with children and pets around?

Just keep them out of the work area. We will tell you when the room can be used again.

How do I book?

Photos of the damage, a picture of the whole bath or shower and your postcode. After that, we just agree a date.

Can you repair something that is been repaired before?

Typically, yes. The old repair comes out first, so let us know about it.

Why does mould come back so fast?

Usually poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

Is the work guaranteed?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Cornwall.

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

Bath resealing in Goonvrea without replacing anything

Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. If you are dealing with a messy previous reseal and unsealed corners, we can normally put it right.

A one-year guarantee comes as standard, so you are not left on your own once we have gone.

Where
Goonvrea (TR5)
Region
Cornwall
Warranty
One year on every repair
Price
Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Why it’s worth resealing in Goonvrea

Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • A fixed quote before you book
  • Accredited with CHAS, Constructionline and SafeContractor
  • We come to you, anywhere in the UK
  • Nothing taken out or refitted

See our pricing.

Landlord and trade work in Goonvrea

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

For anyone letting property in or around Goonvrea, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.

DIY kit or professional repair?

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

Different materials, different repairs

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

Trays are sealed with weight on them, for the same reason.

Common problems we fix in Goonvrea

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.

Look out for any of the following:

  • Black spots in the silicone
  • Gaps by the taps
  • A messy previous reseal
  • Stained silicone

Before you book anyone

  • How long the guarantee is and what it covers
  • Whether the price covers travel
  • What aftercare is recommended
  • What protection goes down before work starts

10 questions to ask before booking

What we can’t put right

Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:

  • Gaps so wide they need filling or trims before sealing
  • Water damage behind the bath that needs a builder
  • Movement in the bath or tray

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths
  • Shower trays & enclosures

Aftercare tips

Once the work has cured, treat it gently:

  • Use the extractor fan
  • Reseal at the first sign of lifting
  • Air the room after use
  • Wipe the joints dry after use

Good ventilation is the best protection, and wipe the joints after use to keep mould away.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.

Goonvrea and the surrounding area

Goonvrea is about 5 miles north of Redruth, in Cornwall. Jobs in Goonvrea are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover 644 places across Cornwall, from the larger towns to small villages.

We work across TR5. Close by, we cover Higher Bal (1 mile north), St Agnes (1 mile north-east), Goonown (1 mile east), Goonbell (1 mile east) and Porthtowan (1 mile south-west). Larger places within reach include Truro (8 miles east), Newquay (10 miles north-east), Falmouth (12 miles south-east), Camborne (7 miles south-west), Redruth (5 miles south) and Helston (14 miles south).

Around Goonvrea

We visit homes around St Agnes ACE Academy, Victory Inn and Church of St Agnes. Goonvrea’s nearest station is Redruth station, roughly 4.9 miles south. Well-known places in the area include St Agnes Museum (0.8 miles north-east) and Camborne Redruth Community Hospital (5.3 miles south). Open spaces near Goonvrea include St Agnes Beacon.

Map of Goonvrea © OpenStreetMap contributors

How the visit works

The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the work takes about two hours for a bath. At the end we talk you through the curing time and the aftercare.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

How to prepare

  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible
  • Open a window if you can

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.