Isle of Wight · England

Bath Resealing for Great Thorness homes

Our technicians come to Great Thorness for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Missing sealant behind the taps
  • Silicone coming away from the tiles
  • Old sealant that looks dirty
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Great Thorness homes

When to call us in Great Thorness

Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.

Keep an eye out for these signs:

  • Missing sealant behind the taps
  • A messy previous reseal
  • Old sealant that looks dirty
  • Gaps in the seal

What your quote should include

  • How to look after the finish
  • What prep work is covered
  • How long the guarantee is and what it covers
  • How your room will be protected

How to compare quotes

Bath resealing in Great Thorness without replacing anything

A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they keep water out. Whether it’s stained silicone and damp near the bath, we can generally put it right, on shower trays & enclosures, wet rooms and basins & vanity units alike.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

Roll-top bath being refinished by a Surface Doctor technician
Where
Great Thorness (PO31)
Area hub
Isle of Wight
Guarantee
One year on every repair
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Your questions about bath resealing in Great Thorness

How do I stop mould in sealant?

Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

What information do you need?

Use the quote form or ring 0345 017 0787, and we will take it from there.

Do you seal over the old sealant?

Never over old. It’s removed, cleaned off and the joint dried first.

Which areas do you work in?

Across the UK. Prices don’t change with location.

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do the materials smell?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Materials and what they mean for the repair

Baths

Baths are resealed with water in them, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Covering Great Thorness

Great Thorness is about 3 miles south-west of Cowes, in Isle of Wight. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 125 places across Isle of Wight, from the larger towns to small villages. Our jobs stretch from Great Thorness to London (about 76 miles away).

Every address in PO31 is within our area. We also travel to Porchfield (1 mile south-west), Locksgreen (1 mile south-west), Rew Street (2 miles north-east), Newtown (2 miles south-west) and Northwood (2 miles north-east). Larger places within reach include Newport (3 miles south-east), Ryde (9 miles east), Cowes (3 miles north-east), Sandown (10 miles south-east), Shanklin (10 miles south-east) and Ventnor (11 miles south-east). For island and remote addresses, call first so we can plan the visit.

What’s near Great Thorness

In Great Thorness, that means homes near Sportsman's Rest pub and the streets around them. A little further out are Carisbrooke Castle (3.5 miles south-east) and St Mary's Hospital (2.8 miles south-east). Open spaces near Great Thorness include Mill Hill.

Map of Great Thorness © OpenStreetMap contributors

Aftercare tips

Looking after the surface is easy, and it makes a real difference:

  • Run the extractor fan during and after showers
  • Dry the seal after bathing
  • Keep bottles off the joints
  • Open a window after bathing

Avoid scraping the joints, and keep shampoo bottles off the joints.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Work for landlords and builders

If you manage property in Great Thorness, we’ll quote for several properties at once. Send photos for each one and we will price them together.

We regularly work with letting and managing agents. Send the address, photos and access details.

Why it’s worth resealing in Great Thorness

Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why Great Thorness clients choose us

  • Dust sheets down, tidy finish
  • No extra charge for your area
  • One-year guarantee on every repair
  • Most jobs done in one visit

Read our pricing.

What we can’t put right

A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:

  • A bath or tray that moves, until its support is fixed
  • Hollow or loose tiles
  • Very wide gaps that need a trim

Send us photos and we’ll tell you honestly.

What we work on

  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths
  • Shower trays & enclosures

How the visit works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a couple of hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We make sure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

How to prepare

  • Let us know about parking or access
  • Keep pets and children out of the room while we work
  • Tell us if there are stairs or a lift

Get a quote

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.