Orkney Islands · Scotland

Bath Resealing in Grimbister

We travel to Grimbister for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Black mould in the sealant
  • Unsealed corners
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Grimbister

Looking after it afterwards

Looking after the surface is easy:

  • Store bottles on a shelf
  • Use the extractor fan
  • Reseal at the first sign of lifting
  • Air the room after use

Avoid scraping the joints, and keep shampoo bottles off the joints.

Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.

About our bath resealing in Grimbister

All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Typical jobs include leaks at the edges and old sealant that looks dirty, in kitchen worktops & sinks, baths and shower trays & enclosures.

Every repair is covered by our one-year guarantee.

Location
Grimbister (KW15)
Area hub
Orkney Islands
Warranty
12 months on all our work
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Honest limits

We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • Rotten walls or floors behind the bath
  • Movement in the bath or tray
  • Very wide gaps that need a trim

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we work on in Grimbister

  • Kitchen worktops & sinks
  • Baths
  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms

What affects the price in Grimbister

There’s no charge for travel to Grimbister. The price comes down to:

  • Previous DIY repairs that have to come out
  • The size and number of damaged areas
  • Unusual colours or finishes
  • What kind of damage it is

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.

Quotes from your photos

We price nearly every job from photos. This is what we need:

  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • A wider photo showing the entire bath or shower

To get a price, send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What your bath or shower is made of matters

Baths

Baths are resealed with water in them, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Our work in Grimbister

Grimbister is about 5 miles west of Kirkwall, in the Orkney Islands. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Grimbister is one of 51 towns and villages in the Orkney Islands where we work.

We cover every part of the KW15 postcode area. Other places close to Grimbister include Finstown (1 mile north-west), Heddle (1 mile west), Germiston (2 miles south-west), Kirbister (4 miles south) and Norseman (4 miles north). If you’re somewhere remote, ring us first and we’ll plan the trip.

Local landmarks in Grimbister

In Grimbister, that means homes near Finstown and the streets around them. A little further out are Balfour Hospital (4.9 miles east) and Kirkwall Castle (4.9 miles east). For a walk, there’s Loch of Wasdale and Hill of Heddle.

Map of Grimbister © OpenStreetMap contributors

For landlords and businesses

If you manage property in Grimbister, we will quote for several properties at once. Just send photos for each address and we will price them together.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Questions from Grimbister

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Do you work for landlords and businesses?

Yes, often. We can quote for several properties together and work between tenancies.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

How do I stop mould in sealant?

Damp is the cause. Ventilation and drying keep it clean longer.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can you quote from pictures?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

Is repairing better than replacing?

Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

Signs you need bath resealing in Grimbister

Even good sealant eventually discolours. Steam, soap and movement all take their toll.

It’s worth getting a quote if you see:

  • Old sealant that looks dirty
  • Water getting behind the bath or tray
  • Black spots in the silicone
  • An untidy old seal

What your quote should include

  • What aftercare is recommended
  • What protection goes down before work starts
  • A fixed price, and whether VAT is included
  • When it can be used again

How to compare quotes

The process

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes around two hours.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Before we arrive

  • Ensure the room can be ventilated
  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive

Get a quote

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.