Isle of Wight · England
Bath Resealing for Hale Common homes
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Hale Common. Send pictures for a free, fixed quote.
- A messy previous reseal
- Black mould in the sealant
- Gaps in the seal
Questions from Hale Common
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
How long will it take?
Generally a couple of hours, then it needs to cure.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
How do I get a price for bath resealing in Hale Common?
Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your PO36 postcode.
Bath resealing in Hale Common, done in place
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. We’re frequently asked to fix silicone smeared on tiles and stained silicone, on basins & vanity units, shower trays & enclosures and baths.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Hale Common (PO36, PO30)
- Region
- Isle of Wight
- Cover
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
Trays are sealed with weight on them, for the same reason.
Common problems we fix in Hale Common
Poor ventilation speeds things up: damp hangs around, and mould grows faster.
Typical reasons for a call-out include:
- Discoloured, yellow sealant
- Gaps in the seal
- An untidy old seal
- Water getting behind the bath or tray
Questions to ask before booking
- How long the guarantee is and what it covers
- What happens if the damage is worse than the photos show
- Who will actually do the work
- If travel is included in the price
Also near Hale Common
Other services in Hale Common
How to care for the repair
It’s all simple stuff:
- Clean the joints with a mild cleaner
- Run the extractor fan during and after showers
- Open a window after bathing
- Reseal at the first sign of lifting
Keep the room well ventilated, and wipe the joints after use.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Hale Common and the surrounding area
Hale Common is about 3 miles north-west of Shanklin, in Isle of Wight. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Hale Common is one of 125 places in Isle of Wight where we work. Our jobs stretch from Hale Common to London (about 76 miles away).
Postcode districts we cover here: PO36 and PO30. With the A3056 close by, Hale Common is easy for our technicians to reach. Close by, we cover Branstone (1 mile east), Winford (1 mile east), Princelett (1 mile south-east), Newchurch (1 mile north-east) and Apse Heath (1 mile south-east). Within a short drive, we also cover Newport (4 miles north-west), Ryde (6 miles north-east), Cowes (8 miles north-west), Sandown (3 miles east), Shanklin (3 miles south-east) and Ventnor (4 miles south). Remote and island addresses take a little more planning, so call us to arrange it.
Local landmarks in Hale Common
In Hale Common, that means homes near Newchurch Primary School, among other places. For rail, the closest station is Shanklin station, about 2.5 miles south-east of the centre. Other landmarks nearby include Museum of Country And Agriculture (1 mile north) and Sandown Castle (3.5 miles east). Not far away are Stenbury Down and Alverstone Mead.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Resealing in Hale Common: why it matters
A reseal is one of the cheapest bathroom jobs there is. Leaving failed sealant can let water cause damage that costs far more to fix. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why Hale Common clients choose us
- We’ll tell you if it’s not worth repairing
- A fixed quote before you book
- A year’s guarantee on all work
- Technicians who travel to you, UK-wide
See our pricing.
What affects the price in Hale Common
We charge the same across the UK, including Hale Common. What changes the price is:
- The size and number of damaged areas
- How hard the colour is to match
- Any earlier repairs that need removing first
- How easy the damage is to reach
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Send photos for a quote
You can typically get a fixed price without us visiting. To make it quick:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- Natural light rather than flash
- A coin beside the damage so we can judge size
If you are in Hale Common and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Landlords, agents and businesses in Hale Common
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes about two hours for a bath, depending on what we find, and we finish by cleaning up and talking you through the result.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
How to prepare
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Ensure the area is dry
Ask for a price
To get a price, send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
