Medway · England
Bath Resealing in Halling
Bath resealing in Halling without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Missing sealant behind the taps
- Old sealant that looks dirty
- Silicone coming away from the tiles
Bath resealing in Halling, done in place
A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they protect the walls and floor. We regularly repair wet rooms, baths and shower trays & enclosures, and common reasons people contact us are gaps in the seal and a messy previous reseal.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Area
- Halling (ME2)
- Area hub
- Medway
- Cover
- One year on every repair
- Price
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Baths
Baths are resealed with water in them, so the joint is at its widest.
Also in Halling
What affects the price in Halling
Prices are worked out job by job. The main factors are:
- What the surface is made of
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- How hard the colour is to match
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath or shower
- Any earlier repairs or coatings
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
When a repair isn’t the answer
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- Gaps too big for silicone alone
- Tiles that move, until they’re refixed
- A bath or tray that moves, until its support is fixed
If in doubt, send pictures and we will say what we think.
What we work on
- Kitchen worktops & sinks
- Baths
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
Covering Halling
Halling is about 3 miles south-west of Rochester, in Medway. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Halling is one of 68 places in Medway where we work. You can also see our page for London, about 25 miles away.
Postcode districts we cover here: ME2. From High Street, Kent Road and Essex Road or anywhere nearby, a technician can come to you. If you’re just outside Halling, we cover Wouldham (1 mile east), Upper Halling (1 mile south-west), North Halling (1 mile north), Holborough (1 mile south) and Peters Village (1 mile south-east). Further out, we also cover Gillingham (6 miles east), Chatham (4 miles east), Rochester (3 miles north-east), Rainham (7 miles east), Strood (3 miles north-east) and Luton (4 miles east).
What’s near Halling
Locally, our jobs take us to homes close to Church of St John the Baptist, Holborough Marshes and The Holmesdale School, among other places. Other local landmarks include The Homeward Bound pub (less than half a mile south) and Halling Primary School (0.7 miles south). Halling has its own railway station: Halling station. A little further out are St. Catherine's Hospital (3.4 miles north-east) and Rochester Castle (3.5 miles north-east). Open spaces near Halling include Blue Bell Hill and Ranscombe Farm.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Run the extractor fan during and after showers
- Clean the sealant gently and regularly
- Open a window after bathing
- Replace the seal when mould sets in
Keep the room well ventilated, and dry the joints after bathing.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.
Questions from Halling
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you come to Halling?
Yes, we do. We send a technician to Halling for every job, with no extra charge for travel.
Can new silicone go over old?
All the old sealant comes out. New silicone won’t bond to old.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we will quote them together.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Why does the silicone keep cracking?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
When to call us in Halling
Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.
If you can see any of these, send us a photo:
- Silicone coming away from the tiles
- Silicone smeared on tiles
- Water getting behind the bath or tray
- Black spots in the silicone
Comparing quotes
- If travel is included in the price
- How your room will be protected
- What prep work is covered
- Whether the price is fixed and includes VAT
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
The process
We agree an arrival time beforehand. Once we’re there, the work takes around two hours in most cases. The room is left tidy and you will know when it can be used.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Before we arrive
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed quote without visiting.
Read more
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
