Surrey · England
Bath Resealing for Hammer homes
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Hammer. Free, fixed quotes from your photos.
- Leaks at the edges
- Mould you cannot clean out
- Old sealant that looks dirty
Bath resealing in Hammer without replacing anything
Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours. We regularly repair shower trays & enclosures, wet rooms and basins & vanity units, and the jobs we see most are unsealed corners and old sealant that looks dirty.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Hammer (GU27)
- Area hub
- Surrey
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Resealing in Hammer: why it matters
A reseal is one of the cheapest bathroom jobs there is, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Hammer customers choose us
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
- Work done at your home or business
Take a look at our prices page.
Aftercare tips
So the finish stays in good condition:
- Let steam out after showers
- Use the extractor fan
- Give the seal a regular clean
- Keep bottles off the joints
Let it cure fully before using the bath or shower, normally about a day.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
The process
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes around two hours. Before we leave, we explain how soon it can be used and how to care for it.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Prices and what affects them
A fixed quote means you know the cost before you book. We look at:
- How much damage there is
- How easy the damage is to reach
- The material
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from photos
Phone pictures are fine. Just ensure we can see:
- Something in shot to show the size
- Natural light rather than flash
- Any details about the material
- A picture taken from further back
Upload a photo of the damage and a wider shot of the whole item, with your GU27 postcode, and we will reply with a fixed quote.
When to call us in Hammer
Poor ventilation speeds things up: damp hangs around, and mould grows faster.
Customers typically contact us about:
- Gaps in the seal
- An untidy old seal
- Discoloured, yellow sealant
- Leaks at the edges
Before you book anyone
- How your room will be protected
- What preparation is included
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
Work for landlords and builders
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Hammer questions
What happens if you find more damage?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
How do I stop mould in sealant?
Damp is the cause. Ventilation and drying keep it clean longer.
Do you work in Hammer?
Yes. We cover the whole UK and travel to Hammer and the rest of Surrey. Send us photos for a fixed quote, or call 0345 017 0787.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
My seal keeps tearing. Why?
Something is moving. Persistent splitting can mean the support needs attention.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
About Hammer
Hammer is about 9 miles south of Farnham, in Surrey. Our repair technicians come to homes and businesses in Hammer and nearby villages, so you don’t need to take anything anywhere. We work in all 395 towns and villages across Surrey, from the larger towns to small villages. We work right across the region, from Hammer to London (about 40 miles away).
Postcode districts we cover here: GU27. Local streets include Hammer Lane, Moor Road and Copse Road, all of which we cover. We also travel to Woolmer Hill (1 mile south), Hammer Bottom (1 mile west), Shottermill (1 mile east), Bramshott Chase (1 mile north) and Linchmere (1 mile south-west). Within a short drive, we also cover Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (11 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
Around Hammer
Around Hammer, we work in homes near Woolmer Hill School, The Prince of Wales pub and Woolmer Hill School. Also close by are Camelsdale Primary School (0.7 miles east) and St. Stephen's Church (0.7 miles east). For rail, the closest station is Haslemere station, about 1.5 miles east. Well-known places in the area include Haslemere and District Hospital (2 miles east). Not far away are Lynchmere Commons and Wheeler's Down.
More services for Hammer
About our accreditations · Every repair comes with a one-year guarantee.
