Warwickshire · England
Bath Resealing in Harbury
Bath resealing in and around Harbury: photo quotes, tidy work and a year’s guarantee.
- Old sealant that looks dirty
- Gaps in the seal
- Water getting behind the bath or tray
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
About our bath resealing in Harbury
We reseal baths with them filled with water, so the joint is at its widest, so the seal doesn’t tear when the bath is first used. Whether it’s black mould in the sealant and unsealed corners, we can generally put it right.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Harbury (CV33)
- Area hub
- Warwickshire
- Cover
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Harbury
Also in Harbury
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a couple of hours from start to finish. Before leaving, we tell you when it can be used and how to care for it.
- The surrounding area is protected and the joints masked.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Make sure the area is dry
Get a quote
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Harbury and nearby
Harbury is about 5 miles south-east of Royal Leamington Spa, in Warwickshire. Anywhere in CV33, we carry out the work at your property. Our technicians cover all 324 towns and villages across Warwickshire. You can also see our page for Birmingham, about 24 miles away.
We cover every part of CV33 and the streets around it. That includes homes on Wagstaffe Close, Heber Drive and Park Lane and the roads around them. Other places close to Harbury include Chesterton (1 mile south-west), Ufton (1 mile north), Deppers Bridge (2 miles east), Chesterton Green (2 miles south-west) and Bishop's Itchington (2 miles south-east). We also work in nearby towns such as Rugby (13 miles north-east), Warwick (6 miles north-west), Royal Leamington Spa (5 miles north-west), Stratford-upon-Avon (11 miles west), Leamington Spa (5 miles north-west) and Kenilworth (9 miles north-west).
Near you in Harbury
In Harbury, that means homes near Church of All Saints, Harbury CofE Primary School and The Shakespeare Public House, among other places. The nearest railway station is Leamington Spa station, roughly 4.7 miles north-west. Further afield, we also cover the area around British Motor Museum (3.4 miles south) and Royal Leamington Spa Rehabilitation Hospital (4.2 miles north-west). Open spaces near Harbury include Harbury Spoilbank.
Harbury questions
Why does the silicone keep cracking?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
How do I stop mould in sealant?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Can you reseal over the old silicone?
Never over old. It’s removed, cleaned off and the joint dried first.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
When to call us in Harbury
Joints split if the bath or tray moves, often because it was sealed while the bath was empty.
The things clients typically mention when they call include:
- Mould you cannot clean out
- Stained silicone
- Gaps by the taps
- Damp near the bath
Questions to ask before booking
- Whether the price is fixed and includes VAT
- What preparation is included
- Who will actually do the work
- Whether there are any call-out or travel charges
Landlords, agents and businesses in Harbury
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What we cannot put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- Very wide gaps that need a trim
- Hidden water damage
- A bath or tray that moves, until its support is fixed
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Shower trays & enclosures
- Wet rooms
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
Trays are sealed with weight on them, for the same reason.
What bath resealing costs
There are no hourly rates or hidden extras. The price is based on:
- The material and finish
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- How hard the colour is to match
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
Photographing the damage takes a minute. Please include:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- A photo taken from further back
If you’re in Harbury and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Store bottles on a shelf
- Keep the joints dry
- Reseal when black spots won’t clean off
- Let steam out after showers
Leave the sealant to cure for the time we give you, usually around 24 hours.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
About our accreditations · Every repair comes with a one-year guarantee.
