Cumbria · England
Bath & shower resealing (mastic) in Harraby, Cumbria
Bath resealing in and around Harraby: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- A messy previous reseal
- Unsealed corners
- Sealant that is split or lifting

Bath resealing at your home in Harraby
We cut out all of the old sealant, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Whether it’s an untidy old seal and gaps in the seal, we can usually put it right.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.

- Area
- Harraby (CA1, CA2)
- Region
- Cumbria
- Warranty
- One year on every repair
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
It helps to know what we cannot do too:
- Tiles that move, until they’re refixed
- Rotten walls or floors behind the bath
- A flexing bath
Send us photos and we’ll tell you honestly.
Materials we work on in Harraby
- Baths
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, to open the joint fully.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Why reseal now?
Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Harraby customers choose us
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
- Repair technicians who travel to you, UK-wide
Take a look at our full price list.
What else we do in Harraby
What we are called out for in Harraby
In time, even good sealant discolours particularly in a well-used bathroom. Steam, soap and movement all wear it down.
Typical reasons for a call-out include:
- Old sealant that looks dirty
- Gaps in the seal
- Water getting behind the bath or tray
- Black mould in the sealant
What to look for in a quote
- Whether the colour is mixed to match
- Aftercare advice
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
The process
Arrival times are agreed in advance. On site, it takes about two hours for a bath. We leave the room clean and ready to use once it has cured.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
How to prepare
- Have a window or extractor fan available
- Make sure the area is dry
- Let us know if it has been repaired before
How to get a price
Send us photos of the damage and a wider shot of the entire item, and tell us you are in Harraby, and we will reply with a fixed price.
Advice
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Landlords, agents and businesses in Harraby
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Replace the seal when mould sets in
- Dry the seal after bathing
- Let steam out after showers
- Clean the joints with a mild cleaner
Keep the room well ventilated, and dry the joints after bathing to keep mould away.
Damp below or loose tiles need checking quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.
About Harraby
Harraby is about 1 mile south-east of Carlisle, in Cumbria. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We cover 438 places across Cumbria, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 51 miles away.
Our visits in CA1 and CA2 are booked in the same way as anywhere else. Local streets include Haig Road, Tree Road and High Road, all of which we cover. Main roads around Harraby include the A6, so getting to you is simple. We also travel to Botcherby (1 mile west), Upperby (1 mile south-west), Currock (1 mile west), Carlisle (1 mile north-west) and Blackwell (1 mile south-west). Within a short drive, we also cover Wigton (11 miles west), Belle Vue (3 miles west), Brampton (8 miles north-east), Etterby (3 miles north-west), Longtown (9 miles north) and Dalston (4 miles south-west).
What’s near Harraby
Typical jobs here are in homes near Our Lady and St Joseph's Church, Harraby Inn and St John Henry Newman Catholic School. You will also find St Elizabeth's Church (within half a mile east) and Petteril Bank School (0.6 miles south). The closest station to Harraby is Carlisle station, roughly 1.1 miles north-west of the centre. Well-known places in the area include Guildhall Museum (1.4 miles north-west) and Carlisle Castle (1.7 miles north-west).
- Local facilities include County Borough of Carlisle (1.3 miles north-west)
FAQs for Harraby
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
When can I use the bath after resealing?
We’ll give you the curing time, generally around a day.
Why does the silicone keep cracking?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
What happens next?
You will get a fixed quote back. You’re under no obligation.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
About our accreditations · Every repair comes with a one-year guarantee.

