Cambridgeshire · England

Bath & shower resealing (mastic) in Harston, Cambridgeshire

Our repair technicians come to Harston for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Missing sealant behind the taps
  • An untidy old seal
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Harston

How we handle bath resealing in Harston

We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours. We work on kitchen worktops & sinks, basins & vanity units and baths, and common reasons people get in touch are damp near the bath and old sealant that looks dirty.

We stand behind the work with a one-year guarantee.

Where
Harston (CB22)
Region
Cambridgeshire
Cover
A year, on every repair
Quote
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What your bath or shower is made of matters

Baths

Baths are resealed with water in them, to open the joint fully.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Common problems we fix in Harston

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint flexes each time the bath fills.

People normally call us when they notice one of these:

  • Sealant that is split or lifting
  • Damp near the bath
  • A messy previous reseal
  • Missing sealant behind the taps

Before you book anyone

  • How to look after the finish
  • How long it needs to cure
  • Whether a trained technician does the job
  • Whether the price covers travel

Choosing a repair company

How to look after the repair

A little care keeps the finish looking good. We recommend:

  • Air the room after use
  • Clean the joints with a mild cleaner
  • Replace the seal when mould sets in
  • Dry the seal after bathing

Let it cure fully before using the bath or shower, normally about a day.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Covering Harston

Harston is about 5 miles south-west of Cambridge, in Cambridgeshire. Customers in Harston get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Our technicians cover all 371 towns and villages across Cambridgeshire. Our jobs stretch from Harston to London (45 miles away).

Our repair technicians cover all of CB22 and the streets around it. Streets in the area include High Street, London Road and Station Road. You will find Harston on the A10, so it’s easy for us to reach. We also travel to Newton (1 mile south-east), Haslingfield (1 mile north-west), Barrington (2 miles south-west), Foxton (2 miles south-west) and Harlton (3 miles west). Further out, we also cover Cambridge (5 miles north-east), St Ives (15 miles north-west), Newmarket (15 miles north-east), Royston (8 miles south-west), Cambourne (8 miles north-west) and King's Hedges (6 miles north).

Local landmarks in Harston

Typical jobs here are in homes near Harston and Newton Community Primary School and Church of All Saints and the streets around them. The closest station to Harston is Foxton station, about 1.9 miles south-west of the centre. Well-known places in the area include Royal Papworth Hospital (3.1 miles north-east) and Fowlmere Castle (3.4 miles south). For a walk, there is Trumpington Meadows and Rowley's Hill.

Map of Harston © OpenStreetMap contributors

What affects the price in Harston

There’s no charge for travel to Harston. The price comes down to:

  • What the surface is made of
  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it
  • The colour and finish to match

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

How to get a fixed quote

A couple of clear pictures is all it takes. It helps if you send:

  • Something in shot to show the size
  • A photo taken from further back
  • Details of any past repairs
  • A clear, close picture of the problem area

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price without visiting.

Questions from Harston

How do I book?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Will the price change on the day?

The price is fixed for what the photos show. If there is more, we will tell you before starting.

My seal keeps tearing. Why?

Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Do you do work for letting agents?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

When we would advise against a repair

A repair isn’t always the answer, and we will tell you before we start. We can’t fix:

  • Tiles that move, until they’re refixed
  • Gaps too big for silicone alone
  • A flexing bath

If in doubt, send pictures and we will say what we think.

What we work on

  • Wet rooms
  • Basins & vanity units
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths

How the visit works

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It usually takes about two hours for a bath, and you are welcome to carry on with your day while we work.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Let us know if it has been repaired before
  • Keep a parking space free if you can
  • Ensure the area is dry

Get a quote

Most customers in Harston get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Send photos for a quote

Related advice

Work for landlords and builders

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.

Housing associations and facilities teams use us for planned and reactive repairs in Cambridgeshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Resealing in Harston: why it matters

A professional reseal costs little compared with water damage. It’s quick, tidy and protects your home. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why choose Surface Doctor in Harston

  • Accredited with CHAS, Constructionline and SafeContractor
  • Work done at your home or business
  • Every repair guaranteed for a year
  • Fixed prices from your pictures

Take a look at our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.