Walsall · England

Bath & shower resealing (mastic) in Heath End, Walsall

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Heath End. Send photos for a free, fixed quote.

  • Mould you cannot clean out
  • Unsealed corners
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Heath End

Bath resealing at your home in Heath End

A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why many DIY jobs peel. Our repair technicians work on baths, kitchen worktops & sinks and wet rooms, and people most frequently call us about sealant that’s split or lifting and a messy previous reseal.

You get a one-year guarantee, the same in Heath End as everywhere else we work.

Roll-top bath being refinished by a Surface Doctor technician
Area
Heath End (WS3, WS4)
Region
Walsall
Guarantee
12 months on all our work
Quotes
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Common questions in Heath End

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

How long does a reseal take?

A bath or shower normally takes a couple of hours. It then needs time to cure.

Do I have to be there?

We need someone to let us in. You don’t need to watch us work.

It’s been repaired before. Can you still fix it?

Usually, yes. The old repair comes out first.

How long before I can shower?

You will get the curing time from us.

Can tenants book a repair?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

How do I stop mould in sealant?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can you reseal over the old silicone?

Never over old. It’s removed, cleaned off and the joint dried first.

Common problems we fix in Heath End

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint flexes each time the bath fills.

Most people get in touch after spotting something like this:

  • Old sealant that looks dirty
  • Gaps in the seal
  • Black mould in the sealant
  • Unsealed corners

Comparing quotes

  • How to look after the finish
  • How the colour is matched
  • What happens if they find more damage
  • Whether a trained technician does the job

Choosing a repair company

When a repair is not the answer

In fairness, there are a few things a repair won’t fix:

  • Gaps so wide they need filling or trims before sealing
  • Hidden water damage
  • A bath or tray that moves, until its support is fixed

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Wet rooms
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Baths

How we price bath resealing

Prices are worked out job by job. The main factors are:

  • Access to the area
  • The material
  • How much damage there is
  • Unusual colours or finishes

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Getting a price from pictures

It only takes a minute to photograph the damage. Please include:

  • A picture taken from further back
  • Any details about the material
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size

For a price in Heath End, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Our work in Heath End

Heath End is about 1 mile east of Bloxwich, in Walsall. Wherever you are in the WS3 postcode area, a technician comes to you. We cover all 39 towns and villages in Walsall. We work right across the region, from Heath End to Birmingham (11 miles away).

Postcode districts we cover here: WS3 and WS4. You’ll find streets such as Hall Lane, Mill Road and Maple Road. Close by, we cover Shelfield (1 mile east), Harden (1 mile south-west), Pelsall (1 mile north), Rushall (1 mile south-east) and Pelsall Wood (1 mile north-west). Further out, we also cover Walsall (3 miles south), Willenhall (4 miles south-west), Caldmore (3 miles south), Highgate (3 miles south), Palfrey (3 miles south) and Yew Tree (4 miles south).

What’s near Heath End

Our clients here include homes close to Walsall Academy, St. Michael and All Angels Pelsall Parish Church and Shelfield Community Academy and the streets around them. Also close by are Rushall Primary School (within half a mile south-east) and The Red Cow pub (less than half a mile north). For rail, the closest station is Bloxwich station, roughly 1.8 miles west of the centre. Other landmarks nearby include Birchills Canal Museum (2.1 miles south-west) and Walsall Castle (2.7 miles south-west). Open spaces near Heath End include Pouk Hill and Bourne Pool.

Map of Heath End © OpenStreetMap contributors

Landlord and trade work in Heath End

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

We carry out planned and one-off repairs for housing associations and facilities teams in Walsall and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

How it works

Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a couple of hours, and the room is left clean and tidy.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. We dry the joint thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Tell us if there are stairs or a lift
  • Ensure the area is dry

Ask for a price

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.

Get a free quote

Read more

Repairs by material

Baths

Baths are resealed with water in them, to open the joint fully.

Shower trays

Trays are sealed with weight on them, for the same reason.

Resealing in Heath End: why it matters

Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

Why us?

  • Generally one visit, start to finish
  • We’ll tell you if it’s not worth repairing
  • Technicians who travel to you, UK-wide
  • CHAS and Constructionline accredited

Take a look at our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.