Somerset · England

Bath Resealing in Henstridge Marsh

Our repair technicians come to Henstridge Marsh for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Stained silicone
  • An untidy old seal
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Henstridge Marsh

For landlords and businesses

If you manage property in Henstridge Marsh, we can repair and quote for several addresses together. Send photos for each one and we will price them together.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

Bath resealing in Henstridge Marsh without replacing anything

The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why many DIY jobs peel. If you’re dealing with an untidy old seal and discoloured, yellow sealant, we can help, on kitchen worktops & sinks, basins & vanity units and wet rooms alike.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Where
Henstridge Marsh (BA8)
Region
Somerset
Warranty
One year on every repair
Quote
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What happens on the day

The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes a couple of hours. At the end we talk you through how soon it can be used and how to look after it.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Preparing for the visit

  • Have a window or extractor fan available
  • Mention if the room is upstairs or in a flat
  • Make sure the area is dry

Get a quote

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Related advice

How we price bath resealing

You will not pay by the hour. The price is based on:

  • Doing more than one item at once
  • The colour and finish to match
  • The size and number of damaged areas
  • Whether it’s a chip, crack, burn or wear

A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

How to get a fixed price

It only takes a minute to photograph the damage. Try to send:

  • A close-up of the damage, in focus
  • Your postcode, so we can check dates
  • A wider photo showing the entire bath or shower
  • Whether it’s been repaired or coated before

Upload a photo of the damage and a wider shot of the whole item, and tell us you’re in Henstridge Marsh, and we will come back with a fixed quote.

Henstridge Marsh questions

How do I stop mould in sealant?

Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

What areas do you cover?

We work UK-wide. Our prices are the same everywhere.

Can I add another job to the visit?

Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.

How do I book?

Use the quote form or ring 0345 017 0787.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

How soon can you come?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

What does bath resealing cost?

Because every job differs, we price from photos. You know the full cost before anything is booked.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Where we work around Henstridge Marsh

Henstridge Marsh is about 12 miles east of Yeovil, in Somerset. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover 640 places in Somerset, from the larger towns to small villages.

Here we cover the BA8 postcode area. We also cover the places around Henstridge Marsh: Henstridge (1 mile west), Whitchurch (1 mile west), Higher Nyland (1 mile north), Lower Nyland (1 mile north-east) and Stalbridge (2 miles south). Within a short drive, we also cover Yeovil (12 miles west), Wincanton (5 miles north), Castle Cary (10 miles north-west), Preston Plucknett (13 miles west), Bruton (10 miles north) and Ilchester (14 miles west).

What’s near Henstridge Marsh

Around Henstridge Marsh, we work in homes near Bird In Hand pub, Church of St Nicholas and St Nicholas CofE Primary School and the streets around them. For rail, the closest station is Templecombe station, about 2.4 miles north-west.

Map of Henstridge Marsh © OpenStreetMap contributors

Resealing in Henstridge Marsh: why it matters

A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why book with us

  • One visit for most repairs
  • Honest advice, even when it means no job
  • CHAS and Constructionline accredited
  • A fixed quote before you book

See our full price list.

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Clean the sealant gently and regularly
  • Ventilate the bathroom well
  • Replace the seal when mould sets in
  • Keep the joints dry

Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

When we’d advise against a repair

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Rotten walls or floors behind the bath
  • Tiles that move, until they’re refixed
  • Gaps so wide they need filling or trims before sealing

Send us photos and we will tell you honestly before booking.

Materials we work on in Henstridge Marsh

  • Shower trays & enclosures
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Wet rooms
  • Baths

Repairs by material

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.