Dorset · England
Bath Resealing in Stalbridge
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Stalbridge. Send pictures for a free, fixed quote.
- Silicone coming away from the tiles
- Water getting behind the bath or tray
- Stained silicone
Bath resealing at your home in Stalbridge
Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, then it needs to cure. We are frequently asked to fix an untidy old seal and water getting behind the bath or tray, in kitchen worktops & sinks, wet rooms and basins & vanity units.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Stalbridge (DT10)
- Area hub
- Dorset
- Cover
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- A bath or tray that moves, until its support is fixed
- Hidden water damage
- Very wide gaps that need a trim
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Baths
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
Work for landlords and builders
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
For anyone letting property in or around Stalbridge, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Signs you need bath resealing in Stalbridge
Poor ventilation speeds things up: moisture sits on the joints longer, and mould grows faster.
The most common problems we’re called about are:
- A messy previous reseal
- Old sealant that looks dirty
- Unsealed corners
- Water getting behind the bath or tray
Questions to ask before booking
- How the colour is matched
- What happens if they find more damage
- Who will actually do the work
- What protection goes down before work starts
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How to look after the repair
To keep it looking its best for years:
- Clean the sealant gently and regularly
- Keep bottles off the joints
- Ventilate the bathroom well
- Open a window after bathing
Let it cure fully before using the bath or shower, normally about a day.
Black mould in sealant isn’t just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.
Towns and villages near Stalbridge
What else we do in Stalbridge
Is resealing worth it?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
What you get with us
- One visit for most repairs
- Honest advice, even when it means no job
- No extra charge for your area
- Everything repaired in place
Take a look at our pricing.
Stalbridge: your questions answered
How do I get a price for bath resealing in Stalbridge?
We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your DT10 postcode.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
How long does a reseal take?
A bath or shower usually takes a couple of hours. It then needs time to cure.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before.
Do you cover the whole of Dorset?
All of Dorset, and the rest of the UK. Travel is included in the price.
Why does mould come back so fast?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Stalbridge and nearby
Stalbridge is about 12 miles north-west of Blandford Forum, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 462 towns and villages across Dorset.
Every address in DT10 is covered. We regularly work on streets such as Station Road, High Street and Robinson Heights and the roads around them. You will find Stalbridge on the A357, which makes it straightforward to reach. Close by, we cover Stalbridge Weston (1 mile south-west), Henstridge (2 miles north-west), Henstridge Marsh (2 miles north), Whitchurch (2 miles north-west) and Pleck (2 miles east). Larger places within reach include Blandford Forum (12 miles south-east), Gillingham (7 miles north-east), Shaftesbury (9 miles east), Sherborne (6 miles west), Peacemarsh (7 miles north-east) and Sturminster Newton (4 miles south-east).
What’s near Stalbridge
Typical jobs here are in homes near Stalbridge Church of England Primary School, Stalbridge Arms Public House and Church of St Mary. The closest station to Stalbridge is Templecombe station, about 3.5 miles north-west of the centre. Further afield, we also cover the area around Sturminster Newton Museum and Mill (3.8 miles south-east). Green spaces nearby include Girdlers Coppice.
Prices and what affects them
We charge the same across the UK, including Stalbridge. What changes the price is:
- Whether old repairs or coatings need taking off
- What the surface is made of
- What kind of damage it is
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
Photographing the damage takes a minute. Please include:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- Any details about the material
- One sharp close-up of the damage
To get a price, send two or three pictures using our quote form or call us. We’ll say right away if a repair is the right fix.
The process
The work is clean and fairly quiet. We protect the area first, then the job itself takes around two hours. Before we leave, we explain the curing time and the aftercare.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Getting ready for the visit
- Open a window if you can
- Tell us if there are stairs or a lift
- Make sure the area is dry
Getting a price
If you are in Stalbridge and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
