Leicestershire · England

Bath & shower resealing (mastic) in High Cross, Leicestershire

Bath resealing across High Cross and nearby, usually in one visit.

  • Silicone smeared on tiles
  • Silicone coming away from the tiles
  • Gaps by the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in High Cross?

What happens on the day

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to about two hours for a bath.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. The bead is smoothed, the tape removed and the seal left to cure.

How to prepare

  • Keep pets and children out of the room while we work
  • Have somewhere for us to park nearby if possible
  • Clear toiletries, mats and anything else from around the area

Get a quote

To get a price, send a couple of pictures through our quote form or call us. We will say immediately whether it can be repaired.

Send pictures for a quote

Related advice

Bath resealing at your home in High Cross

We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. Most jobs take a couple of hours. Common call-outs are for a messy previous reseal and leaks at the edges, in baths, shower trays & enclosures and wet rooms.

We stand behind the work with a one-year guarantee.

Location
High Cross (LE17)
County
Leicestershire
Warranty
12 months on all our work
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

High Cross: your questions answered

What if the damage is worse than the photos show?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

What happens once I’ve sent photos?

We come back with a fixed price. You are under no obligation.

What do you need from me?

Just photos, your postcode and a contact number. On the day, access to the room.

Do I have to be there?

We need someone to let us in. You don’t need to watch us work.

How long does resealing take?

Most reseals take about two hours. It then needs time to cure.

When can I use the bath after resealing?

We’ll give you the curing time, normally around a day.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

How we price bath resealing

We price every job individually. The main factors are:

  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • Unusual colours or finishes
  • How many items we do on one visit

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

How to get a fixed price

Good pictures mean an accurate price. Here’s what we find most useful:

  • What it’s made of, if you know
  • Natural light rather than flash
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size

If you’re in High Cross and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

When we’d advise against a repair

We won’t take on work that won’t last, so here’s what a repair can’t put right:

  • Loose tiles, which need refixing first
  • Gaps so wide they need filling or trims before sealing
  • A bath or tray that moves, until its support is fixed

If in doubt, send photos and we’ll say what we think.

Materials we work on in High Cross

  • Wet rooms
  • Baths
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Basins & vanity units

High Cross and nearby

High Cross is about 4 miles south-east of Hinckley, in Leicestershire. Whether you are in the middle of High Cross or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. High Cross is one of 287 places in Leicestershire where we work. You can also see our page for Birmingham, about 25 miles away.

Every address in LE17 is within our area, from the main roads to the quietest streets. From High Cross Road and Bumble Bee Lane or a nearby road, we can come to you. Nearby, we also work in Wibtoft (1 mile south), Claybrooke Magna (1 mile east), Claybrooke Parva (1 mile east), Ullesthorpe (2 miles east) and Willey (3 miles south-east). Larger places within reach include Hinckley (4 miles north-west), Wigston (10 miles north-east), Lutterworth (5 miles south-east), Blaby (7 miles north-east), Broughton Astley (4 miles north-east) and Earl Shilton (6 miles north).

Local landmarks in High Cross

In High Cross, that means homes near Church of St Mary and Claybrooke Primary School. The nearest railway station is Hinckley station, roughly 4.1 miles north-west of the centre. Not far away are Stoney Cove.

Map of High Cross © OpenStreetMap contributors

How to look after the repair

Much of the damage we repair could have been avoided. These habits help:

  • Clean the joints with a mild cleaner
  • Open a window after bathing
  • Dry the seal after bathing
  • Reseal when black spots won’t clean off

Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Resealing in High Cross: why it matters

Resealing costs very little. Failed sealant can lead to water damage that is much more expensive. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why book with us

  • Fixed prices from your pictures
  • We come to you, anywhere in the UK
  • We leave the room as we found it
  • Same prices wherever you are

Read our pricing.

Do you need bath resealing in High Cross?

Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.

Typical reasons for a call-out include:

  • Leaks at the edges
  • An untidy old seal
  • Gaps in the seal
  • Black mould in the sealant

What your quote should include

  • Whether the colour is mixed to match
  • What happens if they find more damage
  • Whether a trained technician does the job
  • How soon you can use it again

How to compare quotes

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.