North Lincolnshire · England

Bath & shower resealing (mastic) in Holme, North Lincolnshire

Bath, shower and sink resealing with new mould-resistant silicone in Holme, carried out at your home and guaranteed for a year.

  • Unsealed corners
  • An untidy old seal
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Holme homes

About our bath resealing in Holme

We cut out all of the old sealant, deal with any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We work on basins & vanity units, wet rooms and kitchen worktops & sinks, and the jobs we see most are black mould in the sealant and an untidy old seal.

A one-year guarantee comes as standard, so you are not left on your own once we have gone.

Area
Holme (DN16)
Region
North Lincolnshire
Guarantee
One year on every repair
Quotes
Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Common questions in Holme

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

Is a repair better than a new one?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Do you cover Holme?

Yes, we do. We send a technician to Holme for every job, and the price is the same as everywhere else.

Can you repair several things at once?

Of course, and it typically saves money. Just add the extra items to your photos and we will quote them together.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

Why does my sealant keep going mouldy?

Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

Landlord and trade work in Holme

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

What your bath or shower is made of matters

Baths

Baths are resealed with water in them, to open the joint fully.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Why reseal now?

Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why book with us

  • Straight answers about what a repair can do
  • No need to remove anything
  • One-year guarantee on every repair
  • Technicians who travel to you, UK-wide

Take a look at our pricing.

What we’re called out for in Holme

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.

If you can see any of these, send us a photo:

  • Gaps by the taps
  • Sealant that’s split or lifting
  • Discoloured, yellow sealant
  • Black mould in the sealant

What your quote should include

  • What preparation is included
  • How changes to the job are handled
  • Who turns up on the day
  • Whether they match the colour on site

Choosing a repair company

Our work in Holme

Holme is about 2 miles south-east of Scunthorpe, in North Lincolnshire. From the centre of Holme to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We cover 90 places across North Lincolnshire, from the larger towns to small villages. Our jobs stretch from Holme to Leeds (about 42 miles away).

Jobs in DN16 work the same way as everywhere else we cover. We also cover the places around Holme: Ashby (2 miles west), Yaddlethorpe (2 miles west), Scunthorpe (2 miles north-west), Messingham (2 miles south-west) and Bottesford (3 miles west). We also work in nearby towns such as Barton-upon-Humber (11 miles north-east), Brigg (5 miles east), Crosby (4 miles north-west), Broughton (3 miles north-east), Epworth (9 miles west) and Crowle (10 miles north-west).

Around Holme

Locally, our jobs take us to homes close to Frederick Gough School and St Peter and St Paul CofE Primary School and the streets around them. For rail, the closest station is Scunthorpe station, about 3 miles north-west of the centre. Other landmarks nearby include Scunthorpe General Hospital (3.5 miles north-west) and Broughton Castlethorpe (4 miles east).

Map of Holme © OpenStreetMap contributors

What a repair cannot fix

To be straight with you, some problems need a different fix:

  • Rotten walls or floors behind the bath
  • Gaps so wide they need filling or trims before sealing
  • Tiles that move, until they’re refixed

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Baths
  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Shower trays & enclosures

What affects the price in Holme

You won’t pay by the hour. The price depends on:

  • How hard the colour is to match
  • Whether we combine several jobs
  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of

A repair is priced on what needs doing, not where you live. You will see the full price before you book.

Getting a price from photos

Almost every job we do is priced from pictures. This is what we need:

  • The postcode, so we can plan the visit
  • Details of any past repairs
  • Daylight if possible, and no flash reflection
  • A photo taken from further back

Email us a picture of the damage and one of the whole item, and tell us you are in Holme, and we will reply with a fixed quote.

What happens on the day

We agree an arrival time beforehand. On site, it takes around two hours. We leave the room clean.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Preparing for the visit

  • Let the surface dry out before the visit
  • Make sure the room can be ventilated
  • Mention any parking restrictions or tricky access

How to get a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.