Cumbria · England
Bath Resealing for Hycemoor homes
Fixed-price bath resealing in Hycemoor and the surrounding area, done in a single visit in most cases.
- Gaps by the taps
- Silicone smeared on tiles
- Old sealant that looks dirty
About our bath resealing in Hycemoor
Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, then it needs to cure. Typical jobs include black mould in the sealant and gaps in the seal, on baths, basins & vanity units and wet rooms.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Hycemoor (LA19)
- County
- Cumbria
- Guarantee
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Landlords, letting agents and housing providers in Hycemoor use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Towns and villages near Hycemoor
What else we do in Hycemoor
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- Movement in the bath or tray
- Very wide gaps that need a trim
- Hollow or loose tiles
Send us pictures and we will tell you honestly.
What we work on
- Baths
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Shower trays & enclosures
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes about two hours for a bath. We tidy up before we leave and let you know when you can use it again.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Getting ready for the visit
- Let us know about parking or access
- Point us to the nearest place to park
- Clear the area around the damage
Get a quote
For a price in Hycemoor, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Keeping it looking good
To keep it looking its best for years:
- Air the room after use
- Reseal when black spots will not clean off
- Give the seal a regular clean
- Ventilate the bathroom well
Leave the sealant to cure for the time we give you, typically around 24 hours.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
Why reseal now?
Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. We remove the old sealant completely. Our prices are the same across the UK, so there is no premium for Hycemoor. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- We come to you, anywhere in the UK
- We leave the room as we found it
- Same prices wherever you are
- No need to remove anything
Take a look at our full price list.
Materials and what they mean for the repair
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
What bath resealing costs
Every quote is fixed and free. What we look at:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Whether we combine several jobs
- What kind of damage it is
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
You can take the photos on your phone. Ensure they show:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- A photo taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Your questions about bath resealing in Hycemoor
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you quote from photos?
Nearly always. If photos don’t show enough, we will ask for another angle.
Why does mould come back so fast?
Mould needs moisture. Ventilation and drying keep it clean longer.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one.
What does bath resealing cost?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Our work in Hycemoor
Hycemoor is about 14 miles north-west of Barrow-in-Furness, in Cumbria. Across the LA19 area, a technician comes to you. Hycemoor is one of 438 places in Cumbria where we work. We work right across the region, from Hycemoor to Liverpool (64 miles away).
Our technicians cover all of LA19. We also travel to Bootle (1 mile south-east), Corney (2 miles north-east), Waberthwaite (3 miles north-east), Ravenglass (4 miles north) and Silecroft (6 miles south-east). Larger places within reach include Barrow-in-Furness (14 miles south-east), Ulverston (14 miles south-east), Hindpool (14 miles south-east), Salthouse (15 miles south-east), Dalton-in-Furness (13 miles south-east) and Risedale (15 miles south-east).
Landmarks near Hycemoor
The nearest railway station is Bootle (Cumbria) station, about 0.5 miles south-east. Further afield, we also cover the area around Muncaster Castle (4.1 miles north). Green spaces nearby include Buck Barrow and Barfield Tarn.
About our accreditations · Every repair comes with a one-year guarantee.
