Pembrokeshire · Wales

Bath & shower resealing (mastic) in Jeffreyston, Pembrokeshire

We travel to Jeffreyston for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Sealant that’s split or lifting
  • Mould you can’t clean out
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Jeffreyston

What happens on the day

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes about two hours for a bath. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Before we arrive

  • Tell us if there are stairs or a lift
  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive

How to get a price

For a price in Jeffreyston, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

Bath resealing in Jeffreyston, done in place

Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. Most jobs take a couple of hours. Our repair technicians work on basins & vanity units, wet rooms and baths, and common reasons people get in touch are black mould in the sealant and leaks at the edges.

We stand behind the work with a one-year guarantee.

Technician in a mask working on a freestanding roll-top bath
Area
Jeffreyston (SA68)
Area hub
Pembrokeshire
Cover
One year on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

Looking after it afterwards

So the finish stays in good condition:

  • Dry the seal after bathing
  • Reseal at the first sign of lifting
  • Give the seal a regular clean
  • Don’t stand toiletries on the seal

Run the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What we cannot put right

In fairness, there are a few things a repair will not fix:

  • A bath or tray that moves, until its support is fixed
  • Loose tiles, which need refixing first
  • Gaps too big for silicone alone

Not sure? Send photos and we’ll give you a straight answer before booking.

Surfaces we repair

  • Kitchen worktops & sinks
  • Wet rooms
  • Baths
  • Basins & vanity units
  • Shower trays & enclosures

FAQs for Jeffreyston

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Do the materials smell?

Expect a mild smell while we are working, which fades afterwards.

How long will it take?

Most reseals take about two hours. Leave it to cure before use.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

How long before I can shower?

We’ll give you the curing time.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Why does mould come back so fast?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

Our work in Jeffreyston

Jeffreyston is about 10 miles south-east of Haverfordwest, in Pembrokeshire. We visit homes and businesses in Jeffreyston, so you do not need to take anything anywhere. Jeffreyston is one of 223 places in Pembrokeshire we cover.

Postcode districts we cover here: SA68. Neighbouring places we cover include Broadmoor (1 mile east), East Williamston (1 mile south-east), Redberth (2 miles south), Pentlepoir (2 miles east) and Wooden (2 miles east). Within a short drive, we also cover Haverfordwest (10 miles north-west), Milford Haven (11 miles west), Pembroke (7 miles south-west), Pembroke Dock (8 miles west), The Marsh (10 miles north-west) and Dinbych-y-Pysgod (5 miles south-east).

What’s near Jeffreyston

Typical jobs here are in homes near The Jeffreyston Inn, St Oswalds CIW Voluntary Aided School and Church Of St. Jeffrey And St. Oswald and the streets around them. The closest station to Jeffreyston is Saundersfoot station, about 2.2 miles east of the centre. Further afield, we also cover the area around Carew Cheriton Control Tower (3.1 miles south-west) and Tenby Cottage Hospital (4.3 miles south-east). Green spaces nearby include Myrtle Grove Hill.

Map of Jeffreyston © OpenStreetMap contributors

What affects the price in Jeffreyston

Prices are worked out job by job. The main factors are:

  • The material
  • Access to the area
  • Whether we combine several jobs
  • Whether it’s a chip, crack, burn or wear

Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Quotes from your photos

It only takes a minute to photograph the damage. Try to send:

  • One picture of the whole bath or shower
  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • Any earlier repairs or coatings

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Landlord and trade work in Jeffreyston

We work for landlords, letting agents and housing providers in Jeffreyston as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Signs you need bath resealing in Jeffreyston

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.

The most common problems we are called about are:

  • Stained silicone
  • Gaps in the seal
  • Unsealed corners
  • Mould you cannot clean out

What to look for in a quote

  • What protection goes down before work starts
  • What happens if the damage is worse than the pictures show
  • How the colour is matched
  • How long the guarantee is and what it covers

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.