Pembrokeshire · Wales
Bath chip & crack repair in Jeffreyston, Pembrokeshire
Problem with your bath in Jeffreyston? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Chips under the taps
Bath repair in Jeffreyston without replacing anything
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. Typical jobs include cracks in an acrylic bath and chips under the taps, in roll-top & freestanding, acrylic and pressed steel enamel.
All our work is covered by our one-year guarantee, wherever you are in Pembrokeshire.
- Where
- Jeffreyston (SA68)
- Area hub
- Pembrokeshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- Nothing taken out or refitted
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
Take a look at our prices page and bath cost comparison.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, and we finish by cleaning up and talking you through the result.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Point us to the nearest place to park
- Ensure the room can be ventilated
- Keep pets and children out of the room while we work
Ask for a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
Common questions in Jeffreyston
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
What affects the price in Jeffreyston
Repairs from £95. We do not charge extra for travel to Jeffreyston. The price depends on:
- The size and number of damaged areas
- Access to the area
- What the surface is made of
- Doing more than one item at once
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- A close-up of the damage, in focus
- Details of any past repairs
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Looking after it afterwards
Nothing complicated is needed:
- Get a dripping tap fixed promptly
- Do not scrub with anything abrasive
- Use a soft cloth and washing-up liquid for everyday cleaning
- Give the bath a quick rinse after use
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
What we cannot put right
A few problems are outside what a surface repair can do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Places near Jeffreyston
Other services in Jeffreyston
Our work in Jeffreyston
Jeffreyston is about 10 miles south-east of Haverfordwest, in Pembrokeshire. Anywhere in SA68, a technician comes to you. Jeffreyston is one of 223 towns and villages in Pembrokeshire where we work.
Jobs in SA68 work the same way as everywhere else we cover. Other places close to Jeffreyston include Broadmoor (1 mile east), East Williamston (1 mile south-east), Redberth (2 miles south), Pentlepoir (2 miles east) and Wooden (2 miles east). Further out, we also cover Haverfordwest (10 miles north-west), Milford Haven (11 miles west), Pembroke (7 miles south-west), Pembroke Dock (8 miles west), The Marsh (10 miles north-west) and Dinbych-y-Pysgod (5 miles south-east).
Landmarks near Jeffreyston
Our clients here include homes close to The Jeffreyston Inn, St Oswalds CIW Voluntary Aided School and Church Of St. Jeffrey And St. Oswald and the streets around them. The closest station to Jeffreyston is Saundersfoot station, roughly 2.2 miles east of the centre. A little further out are Carew Cheriton Control Tower (3.1 miles south-west) and Tenby Cottage Hospital (4.3 miles south-east). For a walk, there’s Myrtle Grove Hill.
Landlord and trade work in Jeffreyston
We work for landlords, letting agents and housing providers in Jeffreyston as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We are used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
