Gloucestershire · England
Bath Resealing for Kemerton homes
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Kemerton and across Gloucestershire. Send photos for a fixed quote.
- Unsealed corners
- Mould you can’t clean out
- Damp near the bath
How we handle bath resealing in Kemerton
The key to a good reseal is getting all of the old silicone out. New silicone will not bond to old, which is why so many DIY reseals peel. We regularly repair kitchen worktops & sinks, wet rooms and shower trays & enclosures, and the jobs we see most are damp near the bath and sealant that’s split or lifting.
In older homes in a village like Kemerton, walls and floors can move a little, and that splits sealant. We seal baths full of water so the joint is at its widest.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Where
- Kemerton (GL20)
- Region
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quote
- Fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
A repair is not right for every job, for example:
- Hidden water damage
- Very wide gaps that need a trim
- Hollow or loose tiles
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Baths
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Shower trays & enclosures
Places near Kemerton
Also in Kemerton
Kemerton: what to know about resealing
We also work for schools, leisure centres and businesses, so if you look after a building such as Overbury CofE First School, changing rooms and washrooms can be repaired in place too.
Kemerton is about 4 miles north-east of Tewkesbury, in Gloucestershire. Wherever you are in the GL20 postcode area, we carry out the work at your property. Our repair technicians cover all 470 towns and villages in Gloucestershire. Our jobs stretch from Kemerton to Birmingham (31 miles away).
Postcode districts we cover here for bath resealing: GL20. If your bath or shower is in a house or flat on High Street, Bayliss Road and Peppercorn Alley or anywhere close by, we can come to you. We also travel to Westmancote (1 mile north-west), Lower Westmancote (1 mile west), Overbury (1 mile east), Conderton (1 mile east) and Kinsham (1 mile south-west). We also work in nearby towns such as Cheltenham (10 miles south), Gloucester (14 miles south-west), Tewkesbury (4 miles south-west), St Paul's (9 miles south), Lansdown (10 miles south) and Bishop's Cleeve (6 miles south).
What’s near Kemerton
In Kemerton, that means homes near The Crown pub. For rail, the closest station is Ashchurch for Tewkesbury station, roughly 2.8 miles south-west. Nearby you’ll also find Elmley Castle (2.7 miles north-east). For a walk, there’s Beckford Nature Reserve and Kemerton Lake.
When to call us in Kemerton
A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould grows faster.
It’s worth getting a quote if you see:
- Discoloured, yellow sealant
- A messy previous reseal
- Black mould in the sealant
- Missing sealant behind the taps
Landlords with property near Ashchurch for Tewkesbury station (about 2.8 miles south-west) use us between tenancies, so baths and showers are repaired rather than replaced.
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- What protection goes down before work starts
- When it can be used again
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes about two hours for a bath, and we will tell you if anything changes. In a village or hamlet like Kemerton, access can be the only tricky part. Once on site, the job is the same as anywhere.
- The surrounding area is protected and the joints masked.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
Landlords, agents and businesses in Kemerton
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Use the extractor fan
- Dry the seal after bathing
- Air the room after use
- Clean the sealant gently and regularly
Good ventilation is the best protection, and wipe the joints after use to keep mould away.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Kemerton: your questions answered
Do you work for schools and businesses in Kemerton?
Yes, we work for schools, leisure centres and businesses, and our accreditations include CHAS and Constructionline. Send photos and details of the building.
I let a flat near Ashchurch for Tewkesbury station. Can you help between tenants?
Yes, we frequently work between tenancies, and several addresses can be quoted together.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What do you need from me?
Photos of the damage, a photo of the whole bath or shower and your postcode. Then we’ll agree a date.
Can you price it without visiting?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
Why does my sealant keep going mouldy?
Mould needs moisture. Ventilation and drying keep it clean longer.
How long will it take?
A bath or shower typically takes a couple of hours. Leave it to cure before use.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What bath resealing costs
Prices are worked out job by job. What matters most is:
- Whether old repairs or coatings need taking off
- What the surface is made of
- Where the damage is and how we get to it
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
Before you send pictures, these tips help us give you a firm price:
- Any earlier repairs or coatings
- One picture of the whole bath or shower
- The material, if you know it
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
