Gloucestershire · England
Bath Re-enamelling in Kemerton
Bath re-enamelling for Kemerton, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
How to look after the repair
Aftercare is simple:
- Fix dripping taps quickly
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Never use suction bath mats
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Bath re-enamelling in Kemerton without replacing anything
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Our technicians work on pressed steel baths, acrylic baths and basins & shower trays, and the jobs we see most are a bath in a colour that no longer suits and worn patches where water runs and sits.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Kemerton (GL20)
- Region
- Gloucestershire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Kemerton customers choose us
- Colour-matched on site
- CHAS and Constructionline accredited
- One visit for most repairs
- We come to you, anywhere in the UK
See our full price list or resurfacing vs replacement cost guide.
Your questions about bath re-enamelling in Kemerton
How long does re-enamelling take?
One day for most baths, ready the day after. We give you timings with the quote.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
What areas do you cover?
The whole UK, including all of Gloucestershire. Just include your postcode and we’ll confirm dates.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you come to Kemerton?
We do. Technicians travel to Kemerton from across the region, with no extra charge for travel.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Read more
Places near Kemerton
Also in Kemerton
Our work in Kemerton
Kemerton is about 4 miles north-east of Tewkesbury, in Gloucestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 470 towns and villages in Gloucestershire. Our nearest city page is Birmingham, about 31 miles away.
Here we cover the GL20 postcode area. You will find streets such as High Street, Bayliss Road and Peppercorn Alley, and we cover them all. We also travel to Westmancote (1 mile north-west), Lower Westmancote (1 mile west), Overbury (1 mile east), Conderton (1 mile east) and Kinsham (1 mile south-west). Larger places within reach include Cheltenham (10 miles south), Gloucester (14 miles south-west), Tewkesbury (4 miles south-west), St Paul's (9 miles south), Lansdown (10 miles south) and Bishop's Cleeve (6 miles south).
Near you in Kemerton
Typical jobs here are in homes near Overbury CofE First School, Catholic Church of St Benet's and Adjoining Priest's House and The Crown pub, among other places. The closest station to Kemerton is Ashchurch for Tewkesbury station, about 2.8 miles south-west of the centre. A little further out are Elmley Castle (2.7 miles north-east). The countryside around Kemerton includes Beckford Nature Reserve and Kemerton Lake.
Landlords, agents and businesses in Kemerton
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Do you need bath re-enamelling in Kemerton?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Signs it’s time to call us include:
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
Comparing quotes
- How the room is protected while they work
- If travel is included in the price
- What aftercare is recommended
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
