Greater London · England

Bath Resealing in Kentish Town

Local bath resealing for Kentish Town: photo quotes, tidy work and a year’s guarantee.

  • Unsealed corners
  • Gaps in the seal
  • A messy previous reseal
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Kentish Town?

Bath resealing in Kentish Town, done in place

A reseal is a small job that makes a big difference. Clean, white joints make a bathroom look cared for, and they protect the walls and floor. Our repair technicians work on wet rooms, shower trays & enclosures and basins & vanity units, and the jobs we see most are silicone smeared on tiles and black spots in the silicone.

You get a one-year guarantee, the same in Kentish Town as everywhere else we work.

Roll-top bath being refinished by a Surface Doctor technician
Location
Kentish Town (NW5, NW1, NW3)
Area hub
Greater London
Warranty
One year on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

Why it’s worth resealing in Kentish Town

Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.

Why us?

  • We’ll tell you if it’s not worth repairing
  • Same prices wherever you are
  • CHAS, Constructionline and SafeContractor accredited
  • Everything repaired in place

Read our full price list.

How we price bath resealing

There’s no area surcharge for Kentish Town. The price reflects:

  • How easy the damage is to reach
  • What kind of damage it is
  • How many items we do on one visit
  • The size and number of damaged areas

A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Quotes from your pictures

Before you send photos, these tips help us give you a firm price:

  • The material, if you know it
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs

The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.

Kentish Town and nearby

Kentish Town is about 2 miles east of Hampstead, in Greater London. Our technicians come to homes and businesses in Kentish Town and the surrounding area, so nothing has to leave your home. Kentish Town is one of 764 places in Greater London where we work.

All of NW5, NW1 and NW3 is within our area, from the main roads to the quietest streets. Whether you live on Eton Road, Oval Road and Regal Lane or anywhere nearby, a technician can come to you. We also travel to Chalk Farm (1 mile west), Camden Town (1 mile south-east), Gospel Oak (1 mile north), Primrose Hill (1 mile south-west) and Agar Town (1 mile south-east). Larger places within reach include London (4 miles south-east), Kensington (4 miles south-west), Shoreditch (3 miles south-east), Walthamstow (6 miles north-east), Hoxton (3 miles east) and Whitechapel (4 miles south-east).

Local landmarks in Kentish Town

In Kentish Town, that means homes near Vaughan Williams Memorial Library, Church of the Holy Trinity with St Barnabas and Holy Trinity and Saint Silas CofE Primary School, among other places. Nearby too are Haverstock School (under half a mile west), The Hawley Arms (less than half a mile south), North Bridge House School (0.6 miles south) and Primrose Hill (0.7 miles south-west). Kentish Town has its own railway station: Kentish Town West station. Nearby you will also find Metropolitan Borough of Hampstead (1 mile north-west) and Isokon Gallery (0.9 miles north-west). Not far away are The Long Water and Primrose Hill.

Map of Kentish Town © OpenStreetMap contributors

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Baths

Baths are resealed with water in them, so the joint is at its widest.

What we do, step by step

Arrival times are agreed in advance. Once we’re there, the work takes about two hours for a bath in most cases. We leave the room clean.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Have a window or extractor fan available
  • Tell us if there are stairs or a lift

How to get a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You will get a fixed price, not an estimate.

Get a free quote

Advice

Honest limits

It helps to know what we can’t do:

  • Loose tiles, which need refixing first
  • Rotten walls or floors behind the bath
  • A flexing bath

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Shower trays & enclosures
  • Basins & vanity units
  • Baths
  • Kitchen worktops & sinks
  • Wet rooms

When to call us in Kentish Town

Poor ventilation speeds things up: damp hangs around, and mould takes hold.

Keep an eye out for any of the following:

  • Damp near the bath
  • Missing sealant behind the taps
  • An untidy old seal
  • Silicone coming away from the tiles

Before booking anyone

  • What happens if the damage is worse than the photos show
  • How long the guarantee is and what it covers
  • Whether cleaning and preparation are in the price
  • Whether the colour is mixed to match

Choosing a repair company

Common questions in Kentish Town

Can you reseal over the old silicone?

We always remove the old sealant completely. Fresh silicone doesn’t stick to old.

How long before I can shower?

You’ll get the curing time from us, usually around a day.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

What happens once I’ve sent pictures?

We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Let steam out after showers
  • Clean the joints with a mild cleaner
  • Keep bottles off the joints
  • Run the extractor fan during and after showers

Leave the sealant to cure for the time we give you, normally about a day.

Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.

Work for landlords and builders

We’re used to working with agents and managing companies. Send the address, pictures and access details.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.