Calderdale · England
Bath & shower resealing (mastic) in Lee Mount, Calderdale
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Lee Mount. Free, fixed quotes from your pictures.
- Water getting behind the bath or tray
- Mould you can’t clean out
- A messy previous reseal
Bath resealing at your home in Lee Mount
We cut out all of the old sealant, deal with any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Typical jobs include black mould in the sealant and silicone coming away from the tiles, on basins & vanity units, baths and kitchen worktops & sinks.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Lee Mount (HX3, HX1, HX2)
- Region
- Calderdale
- Warranty
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath resealing in Lee Mount?
Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.
Keep an eye out for these signs:
- Discoloured, yellow sealant
- An untidy old seal
- Unsealed corners
- Sealant that’s split or lifting
What to look for in a quote
- How changes to the job are handled
- Whether the colour is mixed to match
- What prep work is covered
- What the guarantee covers, and for how long
The process
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It generally takes around two hours, and you’re welcome to carry on with your day while we work.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Preparing for the visit
- Make sure the room can be ventilated
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Resealing in Lee Mount: why it matters
Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Why Lee Mount customers choose us
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- Rooms protected and left tidy
See our pricing.
What else we do in Lee Mount
Lee Mount and nearby
Lee Mount is about 1 mile north of Halifax, in Calderdale. Clients in Lee Mount get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 129 towns and villages across Calderdale, from the larger towns to small villages. Our jobs stretch from Lee Mount to Leeds (14 miles away).
Every address in HX3, HX1 and HX2 is within our area. Whether you live on Old Lane, Dyer Lane and Mill Lane or a nearby road, we can come to you. You’ll find Lee Mount on the A629 and A647, so it’s easy for us to reach. Close by, we cover Akroydon (1 mile east), Boothtown (1 mile north-east), Pellon (1 mile south-west), Wheatley (1 mile west) and Ovenden (1 mile north). Further out, we also cover Brighouse (4 miles south-east), Todmorden (9 miles west), Elland (3 miles south), Hebden Bridge (6 miles west), Sowerby Bridge (3 miles south-west) and Rastrick (4 miles south-east). Lee Mount is among the bigger towns we cover in Calderdale.
Around Lee Mount
Typical jobs here are in homes near St George's Church, Lee Mount Primary School and The Ridings School, among other places. Also close by are Harrison House (0.9 miles south-east), Halifax High At Wellesley Park (1 mile south-west), St Mary's Church (0.7 miles south) and Old Lane Inn (less than half a mile north-east). Lee Mount’s nearest station is Halifax station, roughly 1.2 miles south-east. Well-known places in the area include Crossley House (0.8 miles south) and Royal Halifax Infirmary (1.4 miles south).
- Local facilities include Shroggs Park (under half a mile south-west) and Halifax Rural District (2.6 miles south-east)
What affects the price in Lee Mount
You won’t pay by the hour. The price depends on:
- How hard the colour is to match
- The material
- How much damage there is
- Where the damage is and how we get to it
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- Where you are, by postcode
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath or shower
- Natural light rather than flash
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.
How to look after the repair
So the finish stays in good condition:
- Clean the joints with a mild cleaner
- Reseal when black spots won’t clean off
- Open a window after bathing
- Run the extractor fan during and after showers
Leave the sealant to cure for the time we give you, normally about a day.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.
Repairs by material
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
What a repair can’t fix
We will always be straight with you, so here’s what a repair cannot fix:
- Water damage behind the bath that needs a builder
- Movement in the bath or tray
- Gaps too big for silicone alone
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Wet rooms
- Kitchen worktops & sinks
Lee Mount: your questions answered
How much does bath resealing cost in Lee Mount?
The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Do you come to Lee Mount?
Yes, we do. Technicians travel to Lee Mount from across the region, with no extra charge for travel.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
My seal keeps tearing. Why?
Movement is the usual cause. We fill the bath before sealing it.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
About our accreditations · Every repair comes with a one-year guarantee.
