North Lincolnshire · England

Bath Resealing in Low Risby

Our repair technicians come to Low Risby for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Silicone smeared on tiles
  • Gaps in the seal
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Low Risby

Low Risby questions

What happens after I send photos?

We come back with a fixed quote. You’re under no obligation.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before and we’ll plan for it.

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Why does my sealant keep going mouldy?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

Do you come to Low Risby?

We do. Repair technicians travel to Low Risby from across the region, and the price is the same as everywhere else.

How do I get a price for bath resealing in Low Risby?

Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your DN15 postcode.

Bath resealing in Low Risby, done in place

All of the old sealant is cut out, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. If you’re dealing with silicone coming away from the tiles and missing sealant behind the taps, we can normally put it right, on basins & vanity units, baths and wet rooms alike.

A one-year guarantee comes as standard, so you’re covered after the visit.

Where
Low Risby (DN15)
County
North Lincolnshire
Cover
12 months on all our work
Quotes
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair will not do:

  • Rotten walls or floors behind the bath
  • Gaps too big for silicone alone
  • Loose tiles, which need refixing first

Send us pictures and we will tell you honestly.

Materials we repair

  • Basins & vanity units
  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Kitchen worktops & sinks

The process

We agree an arrival time beforehand. Once we are there, the work takes around two hours for most jobs. We leave the room clean.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Let us know if it has been repaired before
  • Tell us if there are stairs or a lift
  • Clear the area around the damage

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them over. You will get a fixed price, not an estimate.

Get a fixed price

Read more

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Keep bottles off the joints
  • Clean the joints with a mild cleaner
  • Air the room after use
  • Wipe the joints dry after use

Use the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.

Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

Signs you need bath resealing in Low Risby

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.

Send us a photo if you notice any of these:

  • Water getting behind the bath or tray
  • Silicone coming away from the tiles
  • Discoloured, yellow sealant
  • Missing sealant behind the taps

Before booking anyone

  • How soon you can use it again
  • What prep work is covered
  • How the colour is matched
  • What protection goes down before work starts

How to compare quotes

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Our work in Low Risby

Low Risby is about 4 miles north-east of Scunthorpe, in North Lincolnshire. Whether you are in the middle of Low Risby or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Low Risby is one of 90 towns and villages in North Lincolnshire where we work. Our jobs stretch from Low Risby to Leeds (about 41 miles away).

Every address in DN15 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Appleby (1 mile east), Saxby All Saints (4 miles east), Horkstow (4 miles north-east), Winteringham (5 miles north) and Ferriby Sluice (5 miles north-east). Further out, we also cover Scunthorpe (4 miles south-west), Barton-upon-Humber (8 miles north-east), Bottesford (6 miles south-west), Brigg (6 miles south-east), Frodingham (3 miles south-west) and Crosby (3 miles south-west).

Landmarks near Low Risby

We visit homes around AALPS College, among other places. The nearest railway station is Scunthorpe station, roughly 3.3 miles south-west of the centre. Other landmarks nearby include Scunthorpe General Hospital (3.8 miles south-west).

Map of Low Risby © OpenStreetMap contributors

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

Different materials, different repairs

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Prices and what affects them

We charge the same across the UK, including Low Risby. The price reflects:

  • What kind of damage it is
  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off
  • What the surface is made of

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what we find most useful:

  • A coin beside the damage so we can judge size
  • One picture of the whole bath or shower
  • Natural light rather than flash
  • Details of any past repairs

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed quote the same day in most cases.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.