Newcastle upon Tyne · England

Bath Resealing in Low Walker

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Low Walker and across Newcastle upon Tyne. Free, fixed quotes from your pictures.

  • Gaps in the seal
  • Discoloured, yellow sealant
  • Unsealed corners
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Low Walker

Landlords, agents and businesses in Low Walker

If you manage property in Low Walker, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Bath resealing at your home in Low Walker

A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, in a neat, continuous bead. We regularly repair basins & vanity units, shower trays & enclosures and baths, and the jobs we see most are silicone coming away from the tiles and stained silicone.

Big or small, you get the same one-year guarantee in Low Walker and across Newcastle upon Tyne.

Where
Low Walker (NE6, NE31, NE28)
County
Newcastle upon Tyne
Cover
One year on every repair
Quote
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Materials and what they mean for the repair

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Shower trays

We put weight on a tray before sealing it, for the same reason.

What happens on the day

We agree an arrival time beforehand, so you are not left guessing. On site, it takes around two hours in most cases. We leave the room clean and ready to use once it has cured.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Let us know which floor the room is on
  • Mention any parking restrictions or tricky access

How to get a price

For a price in Low Walker, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Related advice

Aftercare tips

So the finish stays in good condition for years:

  • Open a window after bathing
  • Dry the seal after bathing
  • Clean the sealant gently and regularly
  • Use the extractor fan

Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.

Black mould in sealant isn’t just unsightly. Resealing early keeps water out of the walls and floor.

Do you need bath resealing in Low Walker?

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.

People normally call us after spotting something like this:

  • A messy previous reseal
  • Discoloured, yellow sealant
  • Unsealed corners
  • Gaps in the seal

Before you book anyone

  • How the colour is matched
  • What prep work is covered
  • What happens if they find more damage
  • When it can be used again

10 questions to ask before you book

Common questions in Low Walker

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.

Is there any odour?

Expect a mild smell while we’re working, which fades afterwards.

What happens after I send photos?

We review the pictures and send a fixed quote.

Why does mould come back so fast?

Generally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Will the price change on the day?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

How long does a reseal take?

Generally a couple of hours, then it needs to cure.

When can I use the bath after resealing?

Normally about a day later. We confirm before we leave.

How we price bath resealing

Every quote is fixed and free. What we take into account:

  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work
  • The material

We charge the same wherever you are, so there’s no premium for Low Walker. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from photos

Phone pictures are fine, there’s no need for anything special. Just make sure we can see:

  • A wider photo showing the entire bath or shower
  • The postcode, so we can plan the visit
  • What it’s made of, if you know
  • Something in shot to show the size

There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Where we work around Low Walker

Low Walker is about 1 mile west of Hebburn, in Newcastle upon Tyne. We travel to homes and businesses in Low Walker, so nothing has to leave your home. Low Walker is one of 63 places in Newcastle upon Tyne where we work.

All of NE6, NE31 and NE28 is covered. Local streets include Titan Road, Station Road and Hexham Avenue, all of which we cover. If you are just outside Low Walker, we cover Walker (1 mile west), Hebburn (1 mile east), Walkergate (1 mile north-west), Bill Quay (1 mile south) and Willington Quay (2 miles east). Within a short drive, we also cover Newcastle upon Tyne (4 miles west), Bensham (3 miles south-west), Carr Hill (3 miles south-west), Denton (6 miles west), Slatyford (6 miles west) and Low Fell (4 miles south-west).

Around Low Walker

Typical jobs here are in homes near Carr-Ellison Park, Walker Riverside Academy and Tyneview Primary School and the streets around them. You’ll also find Walker Riverside Academy (within half a mile north-west), Walker Parish Church (less than half a mile south-west) and The Albert Public House (0.6 miles east). Low Walker’s nearest station is Heworth station, roughly 1.9 miles south-west. Well-known places in the area include Royal Arcade (2.8 miles west) and Walkergate Park Hospital (1.3 miles north-west). Open spaces near Low Walker include Bent Hill.

  • Local facilities include Municipal Borough of Wallsend (1 mile north)
Map of Low Walker © OpenStreetMap contributors

Is resealing worth it?

Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • No extra charge for your area
  • Most jobs done in one visit
  • We’ll tell you if it’s not worth repairing

Read our full price list.

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.