Newcastle upon Tyne · England
Bath Resealing in Walkergate
Bath resealing for Walkergate, without a refit. Send us photos for a fixed quote, then we come to you.
- Leaks at the edges
- Missing sealant behind the taps
- Silicone smeared on tiles

What we are called out for in Walkergate
In time, even good sealant discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.
Send us a photo if you notice any of these:
- Gaps by the taps
- Sealant that is split or lifting
- Leaks at the edges
- A messy previous reseal
What to look for in a quote
- How the colour is matched
- A fixed quote, and whether VAT is included
- How long it needs to cure
- What happens if they find more damage
Bath resealing in Walkergate without replacing anything
A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they protect the walls and floor. We’re frequently asked to fix gaps in the seal and mould you can’t clean out, on shower trays & enclosures, wet rooms and basins & vanity units.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Walkergate (NE6, NE28)
- Area hub
- Newcastle upon Tyne
- Cover
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026

Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Let steam out after showers
- Reseal when black spots won’t clean off
- Use the extractor fan
- Wipe the joints dry after use
Do not scrape the sealant with anything sharp, and do not stand bottles on the seal.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we’ll say if you need a builder or plumber.
Landlords, agents and businesses in Walkergate
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Your questions about bath resealing in Walkergate
Do you work in Walkergate?
Yes, we do. We send a technician to Walkergate for every job, and the price is the same as everywhere else.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How much does bath resealing cost in Walkergate?
We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your NE6 postcode.
My seal keeps tearing. Why?
Usually because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Different materials, different repairs
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Also near Walkergate
More services for Walkergate
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Gaps so wide they need filling or trims before sealing
- A flexing bath
- Hollow or loose tiles
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Walkergate
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes about two hours for a bath. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Getting ready for the visit
- Point us to the nearest place to park
- Clear the area around the damage
- Let us know if it has been repaired before
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed quote the same day in most cases.
Read more
What affects the price in Walkergate
There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- How easy the damage is to reach
- The material
- The colour and finish to match
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Send photos for a quote
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- Any details about the material
- Details of any past repairs
- One sharp close-up of the damage
- One picture of the entire bath or shower
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Walkergate and the surrounding area
Walkergate is about 2 miles south-west of Wallsend, in Newcastle upon Tyne. We travel to homes and businesses in Walkergate and nearby villages, so there is no workshop to go to. Our repair technicians cover all 63 towns and villages across Newcastle upon Tyne.
We work across the NE6 and NE28 postcode area and the streets around it. Streets in the area include Ivy Road, Baret Road and Logan Road. Walkergate is on the A187, so it’s easy for us to reach. If you are just outside Walkergate, we cover Walker (1 mile south-east), Heaton (1 mile north-west), Low Walker (1 mile south-east), Cochrane Park (1 mile north-west) and Cradlewell (1 mile west). We also work in nearby towns such as Newcastle upon Tyne (3 miles west), Bensham (3 miles south-west), Carr Hill (3 miles south), Denton (5 miles west), Slatyford (5 miles west) and Low Fell (4 miles south-west).
Landmarks near Walkergate
In Walkergate, that means homes near St. Oswald's, Walker Riverside Academy and Railway Hotel and the streets around them. Nearby too are Walkergate Primary School (less than half a mile north) and Benfield School (under half a mile north). The nearest railway station is Manors station, roughly 2 miles south-west. Nearby you will also find Royal Arcade (2.1 miles south-west) and Segedunum Roman Fort & Museum (1.2 miles east). Open spaces near Walkergate include Bent Hill.
- Local facilities include Municipal Borough of Wallsend (0.9 miles north-east)
About our accreditations · Every repair comes with a one-year guarantee.

