Windsor and Maidenhead · England

Bath & shower resealing (mastic) in Maidenhead, Windsor and Maidenhead

Bath resealing for Maidenhead, without a refit. Send us pictures for a fixed price, then book a visit.

  • Silicone coming away from the tiles
  • A messy previous reseal
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Maidenhead homes

About our bath resealing in Maidenhead

A reseal is a small job that makes a big difference. Clean, white joints make a bathroom look cared for, and they protect the walls and floor. We are often asked to fix discoloured, yellow sealant and leaks at the edges, in basins & vanity units, shower trays & enclosures and wet rooms.

A one-year guarantee comes as standard, so you’re covered after the visit.

Where
Maidenhead (SL6)
Area hub
Windsor and Maidenhead
Warranty
One year on every repair
Price
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Resealing in Maidenhead: why it matters

Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.

Why Maidenhead customers choose us

  • A year’s guarantee on all work
  • We come to you, anywhere in the UK
  • No need to remove anything
  • Rooms protected and left tidy

Read our full price list.

Honest limits

Before you book, it’s worth knowing the limits:

  • Gaps so wide they need filling or trims before sealing
  • Water damage behind the bath that needs a builder
  • A flexing bath

Send us photos and we will tell you honestly.

Materials we work on in Maidenhead

  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Baths
  • Shower trays & enclosures

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

How the visit works

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a couple of hours, and we will keep you posted as we go.

  1. We cut out and remove all of the old sealant.
  2. We clean the joint and treat any mould.
  3. We ensure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Keep a parking space free if you can
  • Mention any earlier repairs or resurfacing

Get a quote

The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will say immediately if a repair is the right fix.

Get a free quote

Advice

FAQs for Maidenhead

Is repairing better than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Do you work in Maidenhead?

Yes. We work across the UK and travel to Maidenhead. Send photos and we will quote, or call 0345 017 0787.

Is there any odour?

It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.

Can you reseal over the old silicone?

We always remove the old sealant completely. Fresh silicone does not stick to old.

Which areas do you work in?

We work UK-wide, and that includes Maidenhead. Our prices are the same everywhere.

Is there a guarantee?

All our work carries a one-year guarantee. We will explain what it covers when we quote.

Why does my sealant keep splitting?

Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.

How do I get a price for bath resealing in Maidenhead?

We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item with your SL6 postcode.

Our work in Maidenhead

Maidenhead is about 27 miles west of London, in Windsor and Maidenhead. Across the SL6 area, a technician comes to you. Our technicians cover all 57 towns and villages across Windsor and Maidenhead. You can also see our page for London, about 27 miles away.

Every address in SL6 is within our area. From High Street Mall, High Street and Laggan Square or a nearby road, we can come to you. You will find Maidenhead on the A4 and A308, so it’s easy for us to reach. Nearby, we also work in Boyn Hill (1 mile south-west), Furze Platt (1 mile north), Cox Green (1 mile south-west), Pinkneys Green (1 mile north-west) and Bray Wick (2 miles south-east). Within a short drive, we also cover Windsor (5 miles south-east), North Ascot (7 miles south), Dedworth (5 miles south-east), Broomhall (10 miles south-east), South Ascot (9 miles south) and Old Windsor (8 miles south-east). As one of the bigger places in Windsor and Maidenhead, Maidenhead sees plenty of our work.

Near you in Maidenhead

We visit homes around Boyne Hill CofE Infant and Nursery School, Desborough College and Braywick Park and the streets around them. Other local landmarks include All Saints' Church (less than half a mile south-west), Claires Court Schools (under half a mile north) and The Windsor Castle pub (under half a mile north-west). The closest station to Maidenhead is Maidenhead station, roughly 0.5 miles south-east of the centre. Other landmarks nearby include The Reitlinger Bequest Museum (1.2 miles east) and St Mark's Hospital (0.6 miles west). For a walk, there is Weycock Hill and Taplow Lake.

Map of Maidenhead © OpenStreetMap contributors

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Use the extractor fan
  • Replace the seal when mould sets in
  • Give the seal a regular clean
  • Keep bottles off the joints

Keep the room well ventilated, and wipe the joints after use so mould struggles to take hold.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

What we are called out for in Maidenhead

Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.

Keep an eye out for these signs:

  • Damp near the bath
  • Gaps in the seal
  • Silicone smeared on tiles
  • Black spots in the silicone

What to look for in a quote

  • What the guarantee covers, and for how long
  • What aftercare is recommended
  • What preparation is included
  • Whether a trained technician does the job

Choosing a repair company

Different materials, different repairs

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Work for landlords and builders

We are used to working with agents and managing companies. Send the address, pictures and access details.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.