Worcestershire · England
Bath Resealing in Malvern
Fixed-price bath resealing in Malvern and the surrounding area, usually in one visit and guaranteed for a year.
- Mould you can’t clean out
- Old sealant that looks dirty
- A messy previous reseal
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes about two hours for a bath. If we find something your photos didn’t show, we will explain it before carrying on.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- We make sure the joint is completely dry.
- For a bath, we fill it with water first so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Ensure the area is dry
- Let us know about parking or access
Getting a price
Upload a photo of the damage and one of the whole item, and tell us you are in Malvern, and we’ll reply with a fixed price.
Related advice
About our bath resealing in Malvern
Baths are resealed with water in them, so the joint opens fully, so the seal does not tear when the bath is first used. We work on kitchen worktops & sinks, shower trays & enclosures and baths, and the jobs we see most are discoloured, yellow sealant and water getting behind the bath or tray.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Malvern (WR14, WR13)
- Region
- Worcestershire
- Guarantee
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
It helps to know what we cannot do too:
- Gaps so wide they need filling or trims before sealing
- Water damage behind the bath that needs a builder
- Loose tiles, which need refixing first
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Shower trays & enclosures
- Kitchen worktops & sinks
- Basins & vanity units
- Wet rooms
- Baths
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Keep bottles off the joints
- Run the extractor fan during and after showers
- Clean the sealant gently and regularly
- Open a window after bathing
Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Signs you need bath resealing in Malvern
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.
People normally call us when they notice one of these:
- Black spots in the silicone
- A messy previous reseal
- Discoloured, yellow sealant
- Silicone coming away from the tiles
What your quote should include
- How your room will be protected
- Whether there are any call-out or travel charges
- What aftercare is recommended
- How changes to the job are handled
Questions from Malvern
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote and the next dates we have.
Why does my sealant keep splitting?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How long before I can shower?
We’ll give you the curing time.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Malvern and nearby
Malvern is about 1 mile south of Great Malvern, in Worcestershire. Anywhere in WR14, we come to you. We cover all 376 towns and villages in Worcestershire, from the larger towns to small villages. We work right across the region, from Malvern to Birmingham (about 31 miles away).
All of WR14 and WR13 is within our area. Jobs here include addresses on Park Road, Como Road and Back Lane. Malvern sits on or near the A449, so getting to you is simple. We also cover the places around Malvern: Barnards Green (1 mile east), Great Malvern (1 mile north), Link Top (1 mile north), Poolbrook (1 mile east) and North Malvern (1 mile north-west). Further out, we also cover Worcester (8 miles north-east), Droitwich Spa (13 miles north-east), Pershore (10 miles east), Warndon (9 miles north-east), Rainbow Hill (8 miles north-east) and St Peter the Great (7 miles north-east).
Around Malvern
Our clients here include homes close to The Chase, The Bank Vaults Public House and Malvern Parish CofE Primary School. You will also find The Chase (0.7 miles south-east) and Great Malvern Priory (under half a mile north-west). There is a railway station in Malvern itself: Great Malvern station. Well-known places in the area include Malvern Museum of Local History (under half a mile north-west) and British Camp (3.6 miles south). The countryside around Malvern includes Worcestershire Beacon and Brotheridge Green Nature Reserve.
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Towns and villages near Malvern
More services for Malvern
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Resealing in Malvern: why it matters
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. Our prices are the same across the UK, so there’s no premium for Malvern. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Malvern
- One visit for most repairs
- One price list for the entire UK
- We’ll tell you if it’s not worth repairing
- We come to you, anywhere in the UK
Take a look at our full price list.
What affects the price in Malvern
There’s no charge for travel to Malvern. The price depends on:
- The material and finish
- How much damage there is
- How easy the damage is to reach
- The type of damage
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- Where you are, by postcode
- One sharp close-up of the damage
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
