Wiltshire · England
Bath & shower resealing (mastic) in Martinslade, Wiltshire
Our technicians come to Martinslade for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Black mould in the sealant
- Discoloured, yellow sealant
- Gaps by the taps
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A bath or tray that moves, until its support is fixed
- Tiles that move, until they’re refixed
- Hidden water damage
Send us pictures and we will tell you honestly.
Surfaces we repair
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Baths
About our bath resealing in Martinslade
Baths, trays, basins and kitchen worktops all get resealed. Most jobs take a couple of hours, plus curing time. Whether it’s black mould in the sealant and gaps by the taps, we can help, on shower trays & enclosures, baths and basins & vanity units alike.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Martinslade (SN12)
- County
- Wiltshire
- Warranty
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Martinslade
Also in Martinslade
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What your bath or shower is made of matters
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
FAQs for Martinslade
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
How long before I can shower?
Normally about a day later. We’ll tell you the exact time.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How do I stop mould in sealant?
Typically poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes about two hours for a bath. If we find something your photos didn’t show, we will explain it before carrying on.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
Before we arrive
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
- Open a window if you can
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Advice
Keeping it looking good
To keep it looking its best:
- Reseal when black spots will not clean off
- Clean the joints with a mild cleaner
- Ventilate the bathroom well
- Keep bottles off the joints
Let it cure fully before using the bath or shower, typically around 24 hours.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Covering Martinslade
Martinslade is about 3 miles south-east of Melksham, in Wiltshire. Wherever you are in the SN12 postcode area, we carry out the work at your property. Martinslade is one of 425 towns and villages in Wiltshire where we work. Our nearest city page is Birmingham, about 77 miles away.
Postcode districts we cover here: SN12. Neighbouring places we cover include Sells Green (1 mile north-west), Seend (1 mile south-west), Poulshot (1 mile south-east), Rowde (1 mile east) and Seend Cleeve (2 miles west). Larger places within reach include Trowbridge (7 miles west), Chippenham (8 miles north), Calne (6 miles north-east), Devizes (3 miles east), Westbury (9 miles south-west) and Melksham (3 miles north-west).
Near you in Martinslade
We visit homes around Church of the Holy Cross, Seend Church of England Primary School and Melksham Oak Community School and the streets around them. Martinslade’s nearest station is Melksham station, about 3.8 miles north-west of the centre. Nearby you will also find Wiltshire Fire Defence And Brigades Museum (3 miles south-east) and Shane's Castle (2.6 miles east). For a walk, there’s King's Play Hill.
How we price bath resealing
We price every job individually, from your photos. What matters most is:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- The material
- Unusual colours or finishes
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
How to get a fixed price
Phone pictures are fine, there is no need for anything special. Make sure they show:
- A picture taken from further back
- Natural light rather than flash
- Something in shot to show the size
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Signs you need bath resealing in Martinslade
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning can’t get it all out.
People normally call us when they notice one of these:
- An untidy old seal
- Discoloured, yellow sealant
- Leaks at the edges
- Mould you can’t clean out
Questions to ask before you book
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- How the colour is matched
Work for landlords and builders
If you manage property in Martinslade, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
