Staffordshire · England

Bath & shower resealing (mastic) in Milford, Staffordshire

Our repair technicians come to Milford for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.

  • Black mould in the sealant
  • Water getting behind the bath or tray
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Milford?

Bath resealing in Milford, done in place

A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why many DIY jobs peel. We work on wet rooms, shower trays & enclosures and baths, and the jobs we see most are unsealed corners and leaks at the edges.

You get a one-year guarantee, the same in Milford as everywhere else we work.

Roll-top bath being refinished by a Surface Doctor technician
Where
Milford (ST17)
County
Staffordshire
Cover
One year on every repair
Price
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

How it works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which typically takes about two hours for a bath. If we find something your photos didn’t show, we will explain it before carrying on.

  1. All the old sealant is cut out and removed.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Getting ready for the visit

  • Keep a parking space free if you can
  • Open a window if you can
  • Tell us about parking, stairs or access

How to get a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.

Get a fixed price

Advice

Aftercare tips

Nothing complicated is needed:

  • Reseal at the first sign of lifting
  • Run the extractor fan during and after showers
  • Don’t stand toiletries on the seal
  • Air the room after use

Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Black mould in sealant is not just unsightly. Resealing early keeps water out of the walls and floor.

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.

How we price bath resealing

Quotes are free and the price is fixed. What we take into account:

  • The size and number of damaged areas
  • Unusual colours or finishes
  • The material
  • Doing more than one item at once

The price reflects the work involved, not where you live. You will see the full price before booking.

Quotes from your photos

We price nearly every job from pictures. This is what we need:

  • The material, if you know it
  • Your postcode, so we can check dates
  • A wider photo showing the whole bath or shower
  • Daylight if possible, and no flash reflection

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Your questions about bath resealing in Milford

How much does bath resealing cost in Milford?

Because every job differs, we price from pictures. You will get a fixed figure before you book.

Can you repair something that’s been repaired before?

Yes, we often do. It can add a little time, which we include in the quote.

Which areas do you work in?

The entire UK, including all of Staffordshire. Just include your postcode and we will confirm dates.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Do you seal over the old sealant?

No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.

What happens next?

We check the damage, the material and your postcode, then reply with a quote.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

Can landlords book you?

Yes, frequently. We can quote for several properties together and work between tenancies.

When to call us in Milford

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.

Keep an eye out for any of the following:

  • Gaps in the seal
  • Unsealed corners
  • Silicone smeared on tiles
  • Leaks at the edges

Questions to ask before booking

  • How long the guarantee is and what it covers
  • If travel is included in the price
  • A fixed quote, and whether VAT is included
  • Who will actually do the work

How to compare quotes

Honest limits

We would rather lose a job than do one that will not last, so these are the limits:

  • Very wide gaps that need a trim
  • A bath or tray that moves, until its support is fixed
  • Rotten walls or floors behind the bath

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Milford

  • Kitchen worktops & sinks
  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms

About Milford

Milford is about 3 miles east of Stafford, in Staffordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 512 towns and villages across Staffordshire. Our nearest city page is Birmingham, about 23 miles away.

Here we cover the ST17 postcode area. Streets in the area include Holdiford Road, Brocton Road and Main Road. We also cover the places around Milford: Tixall (1 mile north), Walton-on-the-Hill (1 mile west), Brocton (1 mile south), Berkswich (1 mile west) and Baswich (2 miles west). Further out, we also cover Stafford (3 miles west), Cannock (6 miles south), Lichfield (12 miles south-east), Longton (14 miles north), Rugeley (5 miles south-east) and Burntwood (9 miles south-east).

Landmarks near Milford

Locally, our jobs take us to homes close to Walton High School, Berkswich CofE (VC) Primary School and Shugborough Park and the streets around them. The closest station to Milford is Stafford station, about 3.5 miles west. Further afield, we also cover the area around Stafford Castle (4.5 miles west) and The Staffordshire Police Museum (1.7 miles west). Green spaces nearby include Tixall Wide and Radford Meadows.

Map of Milford © OpenStreetMap contributors

Why reseal now?

Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

What you get with us

  • No need to remove anything
  • No extra charge for your area
  • Fixed prices from your pictures
  • We come to you, anywhere in the UK

Read our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.