Kent · England
Bath & shower resealing (mastic) in Millbank, Kent
Local bath resealing for Millbank: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Leaks at the edges
- Sealant that’s split or lifting
- Gaps by the taps
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Bath resealing in Millbank without replacing anything
The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why many DIY jobs peel. Whether it’s black spots in the silicone and stained silicone, we can help.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Millbank (CT3)
- Area hub
- Kent
- Warranty
- One year on every repair
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to a couple of hours, including clearing up.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
How to prepare
- Ensure the area is dry
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
Getting a price
Send us photos of the damage and one of the entire item, with your CT3 postcode, and we will reply with a fixed price.
Read more
Different materials, different repairs
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
How we price bath resealing
Each job gets its own fixed quote. These are the things that affect it:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- The material
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- Any details about the material
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Nearby places to Millbank
More services for Millbank
Why it’s worth resealing in Millbank
A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Failed sealant can lead to water damage that is much more expensive. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why book with us
- Everything repaired in place
- Same prices wherever you are
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page.
Millbank and the surrounding area
Millbank is about 2 miles south-east of Herne Bay, in Kent. From the centre of Millbank to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover 922 places across Kent. You can also see our page for London, about 55 miles away.
Our visits in CT3 work the same way as everywhere else we cover. We also travel to Maypole (1 mile south), Old Tree (1 mile south-east), Highstead (1 mile north-east), Hoath (1 mile south) and Knave's Ash (1 mile south-west). Within a short drive, we also cover Canterbury (6 miles south-west), Margate (10 miles east), Dover (15 miles south), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Near you in Millbank
Locally, our jobs take us to homes close to Curtis Wood, Hoath Primary School and The Huntsman And Horn Public House and the streets around them. Also close by are Church of the Holy Cross (0.8 miles south) and Spires Academy (2.4 miles south). Millbank’s nearest station is Herne Bay station, roughly 2.4 miles north-west of the centre. Nearby you will also find Whitstable and Tankerton Hospital (5 miles west). Open spaces near Millbank include West Blean and Thornden Woods.
Millbank questions
When can I use the bath after resealing?
Normally after around 24 hours. We’ll tell you the exact time.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
What information do you need?
Photos of the damage, a picture of the whole bath or shower and your postcode. After that, we just agree a date.
Can you reseal over the old silicone?
We always remove the old sealant completely. New silicone won’t bond to old.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
How much does bath resealing cost in Millbank?
We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your CT3 postcode.
Looking after it afterwards
So the finish stays in good condition:
- Don’t stand toiletries on the seal
- Reseal at the first sign of lifting
- Keep the joints dry
- Open a window after bathing
Keep the room well ventilated, and dry the joints after bathing to keep mould away.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
What we can’t put right
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Water damage behind the bath that needs a builder
- A bath or tray that moves, until its support is fixed
- Tiles that move, until they’re refixed
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Millbank
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
