Kent · England
Bath Resealing for Old Tree homes
Bath resealing across Old Tree and nearby, normally in one visit and guaranteed for a year.
- Unsealed corners
- Leaks at the edges
- Stained silicone
Bath resealing in Old Tree without replacing anything
Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, then it needs to cure. If you’re dealing with an untidy old seal and leaks at the edges, we can usually put it right, on shower trays & enclosures, baths and kitchen worktops & sinks alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Old Tree (CT3)
- Area hub
- Kent
- Warranty
- 12 months on all our work
- Quote
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How we price bath resealing
Each job gets its own fixed quote. These are the things that affect it:
- How many items we do on one visit
- What the surface is made of
- How hard the colour is to match
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
How to get a fixed price
Before you send pictures, a few simple things make all the difference:
- A wider photo showing the whole bath or shower
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Different materials, different repairs
Baths
Baths are resealed with water in them, to open the joint fully.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Signs you need bath resealing in Old Tree
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
Look out for any of the following:
- Silicone smeared on tiles
- Black spots in the silicone
- Damp near the bath
- Discoloured, yellow sealant
Before you book anyone
- The length of the guarantee and what it covers
- How the colour is matched
- A fixed price, and whether VAT is included
- What happens if they find more damage
Honest limits
Before you book, it’s worth knowing the limits too:
- Water damage behind the bath that needs a builder
- Loose tiles, which need refixing first
- Movement in the bath or tray
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
- Wet rooms
- Basins & vanity units
Landlords, agents and businesses in Old Tree
If you manage property in Old Tree, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
We regularly work with letting and managing agents. Send the address, photos and access details.
Why it’s worth resealing in Old Tree
A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Failed sealant can lead to water damage that is much more expensive. The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
Why Old Tree customers choose us
- Free fixed quotes from pictures
- Work done at your home or business
- Rooms protected and left tidy
- Everything repaired in place
See our pricing.
Your questions about bath resealing in Old Tree
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What happens after I send pictures?
We review the pictures and send a fixed quote.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Why does my sealant keep splitting?
Generally because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.
How do I stop mould in sealant?
Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Old Tree and the surrounding area
Old Tree is about 3 miles south-east of Herne Bay, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Old Tree is one of 922 places in Kent where we work. We work right across the region, from Old Tree to London (about 56 miles away).
Postcode districts we cover here: CT3. Nearby, we also work in Maypole (1 mile west), Hoath (1 mile south-west), Millbank (1 mile north-west), Knave's Ash (1 mile south-west) and Hollow Street (1 mile south-east). We also work in nearby towns such as Canterbury (6 miles south-west), Margate (10 miles east), Dover (15 miles south), Ramsgate (10 miles east), Broadstairs (11 miles east) and Whitstable (6 miles west).
Local landmarks in Old Tree
Our customers here include homes close to Curtis Wood, Church of the Holy Cross and Spires Academy, among other places. The nearest railway station is Herne Bay station, about 2.9 miles north-west. Further afield, we also cover the area around St Martins Hospital (5.1 miles south-west). For a walk, there is West Blean and Thornden Woods.
Nearby places to Old Tree
More services for Old Tree
What we do, step by step
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a couple of hours. The room is left tidy and ready to use once it has cured.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
How to prepare
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
How to get a price
For a price in Old Tree, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
