Cheshire East · England
Bath & shower resealing (mastic) in Mobberley, Cheshire East
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Mobberley and across Cheshire East. Send pictures for a free, fixed quote.
- Old sealant that looks dirty
- Black spots in the silicone
- Silicone coming away from the tiles
Bath resealing in Mobberley without replacing anything
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Common call-outs are for silicone coming away from the tiles and a messy previous reseal, across baths, basins & vanity units and kitchen worktops & sinks.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Mobberley (WA16)
- Area hub
- Cheshire East
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Mobberley
Mobberley is about 2 miles north-east of Knutsford, in Cheshire East. We travel to homes and businesses in Mobberley and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover all 254 towns and villages across Cheshire East, from the larger towns to small villages. We work right across the region, from Mobberley to Manchester (12 miles away).
Jobs in WA16 work the same way as everywhere else we cover. That includes homes on Station Road, Oldfield Drive and Bucklow Avenue and the roads around them. Close by, we cover Knutsford (2 miles south-west), Thorns Green (3 miles north), Tatton Dale (3 miles north-west), Ashley (3 miles north) and Mere (3 miles west). Within a short drive, we also cover Macclesfield (9 miles south-east), Congleton (11 miles south-east), Wilmslow (4 miles east), Middlewich (10 miles south-west), Sandbach (12 miles south) and Poynton (9 miles east).
What’s near Mobberley
Locally, our jobs take us to homes close to Knutsford Academy, St Wilfrid's Church and Bull's Head pub, among other places. The closest station to Mobberley is Mobberley station, roughly 1.1 miles north of the centre. Nearby you’ll also find Ullerwood Castle (2.8 miles north-east) and Knutsford War Memorial Cottage Hospital (1.9 miles south-west). Green spaces nearby include Lindow Common.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Towns and villages near Mobberley
More services for Mobberley
Resealing in Mobberley: why it matters
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Dust sheets down, tidy finish
- No extra charge for your area
- One-year guarantee on every repair
- Normally one visit, start to finish
Read our pricing.
What affects the price in Mobberley
You will not pay by the hour. The price depends on:
- What kind of damage it is
- The colour and finish to match
- What the surface is made of
- How much damage there is
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
How to get a fixed quote
You can usually get a fixed quote without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- One picture of the entire bath or shower
- Something in shot to show the size
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
When to call us in Mobberley
Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.
People usually call us when they notice something like this:
- Old sealant that looks dirty
- Water getting behind the bath or tray
- Mould you can’t clean out
- Missing sealant behind the taps
What to look for in a quote
- The length of the guarantee and what it covers
- What prep work is covered
- How changes to the job are handled
- How soon you can use it again
Looking after it afterwards
Aftercare is simple:
- Don’t stand toiletries on the seal
- Ventilate the bathroom well
- Keep the joints dry
- Replace the seal when mould sets in
Run the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.
FAQs for Mobberley
Why does my sealant keep going mouldy?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Do you work in Mobberley?
We do. Repair technicians travel to Mobberley from across the region, with no extra charge for travel.
How do I get a price for bath resealing in Mobberley?
Because every job differs, we price from photos. You’ll get a fixed figure before you book.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Why does the silicone keep cracking?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Baths
Baths are resealed with water in them, so the joint is at its widest.
What we cannot put right
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Movement in the bath or tray
- Hidden water damage
- Loose tiles, which need refixing first
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Baths
- Wet rooms
- Kitchen worktops & sinks
- Shower trays & enclosures
- Basins & vanity units
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow around two hours from start to finish. Before leaving, we tell you how long to leave it and how to care for it.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
