Cheshire East · England
Bath Resealing for Wilmslow homes
Bath, shower and sink resealing with new mould-resistant silicone at your home in Wilmslow, with a one-year guarantee on every repair.
- Gaps by the taps
- Old sealant that looks dirty
- Gaps in the seal
When we would advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- Hidden water damage
- Hollow or loose tiles
- Very wide gaps that need a trim
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Baths
- Kitchen worktops & sinks
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
Bath resealing in Wilmslow, done in place
Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. Most jobs take a couple of hours, then it needs to cure. Whether it’s gaps by the taps and gaps in the seal, we can help, on wet rooms, baths and shower trays & enclosures alike.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Area
- Wilmslow (SK9)
- Area hub
- Cheshire East
- Warranty
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Wilmslow
Wilmslow is about 5 miles south of Wythenshawe, in Cheshire East. Whether you are in the middle of Wilmslow or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in all 254 towns and villages across Cheshire East, from the larger towns to small villages. We work right across the region, from Wilmslow to Manchester (10 miles away).
Our technicians cover all of SK9. Jobs here include addresses on Station Road, Church Road and Mill Road. Main roads around Wilmslow include the A34 and A538, so getting to you is simple. Neighbouring places we cover include Dean Row (1 mile east), Handforth (2 miles north-east), Styal (2 miles north), Morley (2 miles north-west) and Alderley Edge (2 miles south). Within a short drive, we also cover Macclesfield (6 miles south-east), Congleton (11 miles south), Knutsford (6 miles west), Middlewich (13 miles south-west), Sandbach (14 miles south-west) and Poynton (5 miles east). Wilmslow is among the bigger towns we cover in Cheshire East.
Landmarks near Wilmslow
Around Wilmslow, we work in homes near The Carrs Park, Lacey Green Primary Academy and Wilmslow High School. You will also find St Bartholomew's Church (within half a mile north-east) and George and Dragon Public House (under half a mile east). Wilmslow has its own railway station: Wilmslow station. A little further out are Alexandra Hospital (4.7 miles north) and Ullerwood Castle (3.2 miles north-west). Open spaces near Wilmslow include Lindow Common.
Common problems we fix in Wilmslow
Joints split if the bath or tray moves, often because it was sealed with the bath empty.
Most people get in touch after spotting one of these:
- Damp near the bath
- Black spots in the silicone
- Stained silicone
- Sealant that’s split or lifting
Questions to ask before booking
- If travel is included in the price
- Who turns up on the day
- How the colour is matched
- How long it needs to cure
Questions from Wilmslow
How much does bath resealing cost in Wilmslow?
Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
My seal keeps tearing. Why?
Something is moving. If it keeps happening, the support may need fixing.
How long does resealing take?
A bath or shower normally takes a couple of hours. It then needs time to cure.
Do you seal over the old sealant?
Never over old. It’s removed, cleaned off and the joint dried first.
Why does my sealant keep going mouldy?
Mould needs moisture. Ventilation and drying keep it clean longer.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Which areas do you work in?
We cover the whole UK, including Wilmslow and the rest of Cheshire East. Just include your postcode and we’ll confirm dates.
What bath resealing costs
There is no area surcharge for Wilmslow. The price reflects:
- The colour and finish to match
- The type of damage
- Previous DIY repairs that have to come out
- How much damage there is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Any details about the material
- Details of any past repairs
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Why reseal now?
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why book with us
- Free fixed quotes from pictures
- We will tell you if it’s not worth repairing
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
See our pricing.
The process
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the work takes around two hours. Before we leave, we explain how soon it can be used and how to care for it.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- We make sure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Before we arrive
- Keep a parking space free if you can
- Open a window if you can
- Ensure the area is dry
How to get a price
Upload photos of the damage and a wider shot of the entire item, and tell us you are in Wilmslow, and we will reply with a fixed quote.
Advice
Repairs by material
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
We fill the bath before sealing, to open the joint fully.
Nearby places to Wilmslow
Also in Wilmslow
Keeping it looking good
To keep it looking its best for years:
- Give the seal a regular clean
- Dry the seal after bathing
- Reseal at the first sign of lifting
- Keep bottles off the joints
Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
