Shropshire · England
Bath Resealing in Montford Bridge
Bath resealing across Montford Bridge and nearby, done in a single visit in most cases.
- An untidy old seal
- Black mould in the sealant
- Discoloured, yellow sealant
Bath resealing at your home in Montford Bridge
A fresh seal protects your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and resealing puts a stop to that. Whether it’s black mould in the sealant and gaps in the seal, we can generally put it right, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Montford Bridge (SY4)
- County
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A flexing bath
- Gaps so wide they need filling or trims before sealing
- Water damage behind the bath that needs a builder
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Wet rooms
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & sinks
Different materials, different repairs
Baths
Baths are resealed with water in them, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Do you need bath resealing in Montford Bridge?
A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould grows faster.
You may need us if you’ve spotted:
- Stained silicone
- Black mould in the sealant
- Damp near the bath
- A messy previous reseal
Questions to ask before booking
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
- How the room is protected while they work
- Whether the colour is mixed to match
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Is resealing worth it?
Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
Take a look at our prices page.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a couple of hours. Before we leave, we explain the curing time and the aftercare.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
How to prepare
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Related advice
Montford Bridge questions
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
How long does a reseal take?
Usually a couple of hours, plus curing time.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Why does my sealant keep splitting?
Movement is the usual cause. We seal baths full of water.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Montford Bridge and the surrounding area
Montford Bridge is about 4 miles west of Shrewsbury, in Shropshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Montford Bridge is one of 433 towns and villages in Shropshire we cover. You can also see our page for Birmingham, about 44 miles away.
All of SY4 is covered. You’ll find streets such as Holyhead Road, Alloe Brook and The Crescent, all of which we cover. We also travel to Bicton (1 mile east), Calcott (1 mile south-east), Forton Heath (1 mile north), Ford (2 miles south-west) and Oxon (2 miles south-east). We also work in nearby towns such as Shrewsbury (4 miles east), Oswestry (12 miles north-west), Coleham (4 miles south-east), Kingsland (4 miles south-east), Belle Vue (5 miles south-east) and Monkmoor (5 miles east).
What’s near Montford Bridge
Our customers here include homes close to Church of Saint Chad and Bicton CofE Primary School and Nursery and the streets around them. The closest station to Montford Bridge is Shrewsbury station, roughly 4.2 miles east. Other landmarks nearby include Shelton Hospital (2.3 miles south-east) and The Parade Shopping Centre (2.9 miles south-east).
Places near Montford Bridge
More services for Montford Bridge
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Let steam out after showers
- Keep the joints dry
- Replace the seal when mould sets in
- Run the extractor fan during and after showers
Keep the room well ventilated, and wipe the joints after use to keep mould away.
Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. An early reseal keeps water where it belongs.
Landlord and trade work in Montford Bridge
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
We work for landlords, letting agents and housing providers in Montford Bridge as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
