Highland · Scotland

Bath Resealing in Munlochy

Bath, shower and sink resealing with new mould-resistant silicone at your home in Munlochy, with a one-year guarantee on every repair.

  • Old sealant that looks dirty
  • Gaps by the taps
  • Gaps in the seal
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Munlochy

Your questions about bath resealing in Munlochy

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can you price it without visiting?

In nearly every case. If photos don’t show enough, we will ask for another angle.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Are there extra charges for Munlochy?

There is no separate call-out charge. The fixed quote covers the visit and the work.

How long does a reseal take?

Around two hours for a bath, then it needs to cure.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

What happens once I’ve sent pictures?

We review the photos and send a fixed quote with dates.

About our bath resealing in Munlochy

All of the old sealant is cut out, deal with any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Typical jobs include damp near the bath and sealant that’s split or lifting, across wet rooms, kitchen worktops & sinks and shower trays & enclosures.

Every job is backed for twelve months in Munlochy and everywhere else. If something goes wrong with the work, we come back.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Munlochy (IV8)
Area hub
Highland
Cover
One year on every repair
Quote
Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026

Covering Munlochy

Munlochy is about 6 miles north of Inverness, in Highland. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Our repair technicians cover 253 places across Highland, from the larger towns to small villages.

Every address in IV8 is within our area. Jobs here include addresses on Station Road, Cameron Drive and Brae Terrace and the roads around them. Nearby, we also work in North Kessock (3 miles south), Charlestown (3 miles south), Avoch (3 miles east), Killen (3 miles north-east) and Culbokie (4 miles north-west). We also work in nearby towns such as Inverness (6 miles south), Nairn (15 miles east), Cradlehall (7 miles south-east), Merkinch (5 miles south), Dingwall (7 miles north-west) and Hilton (6 miles south). Remote and island addresses take a little more planning, so it’s best to call first.

Landmarks near Munlochy

Typical jobs here are in homes near Knockbain Munlochy Parish Church and Boundary Wall and the streets around them. Other landmarks nearby include Clan Maclennan Museum (2.1 miles south) and Royal Northern Infirmary (5.7 miles south). The countryside around Munlochy includes Ord Hill.

Map of Munlochy © OpenStreetMap contributors

Work for landlords and builders

For anyone letting property in or around Munlochy, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

When a repair isn’t the answer

Some problems need a builder, plumber or fitter rather than us:

  • Hollow or loose tiles
  • Gaps so wide they need filling or trims before sealing
  • Hidden water damage

If in doubt, send photos and we’ll say what we think before booking.

Surfaces we repair

  • Baths
  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures

The process

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a couple of hours, and we finish by cleaning up and talking you through the result.

  1. We protect the area and mask the joint lines.
  2. Old sealant and residue are removed.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

Before we arrive

  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area
  • Mention any earlier repairs or resurfacing

Getting a price

The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say immediately whether it can be repaired.

Send photos for a quote

Related advice

When to call us in Munlochy

In time, even good sealant discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.

Signs it’s time to call us include:

  • Leaks at the edges
  • Black mould in the sealant
  • Gaps by the taps
  • Silicone smeared on tiles

Before you book anyone

  • How your room will be protected
  • Whether there are any call-out or travel charges
  • What the guarantee covers, and for how long
  • How to look after the finish

How to compare quotes

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Materials and what they mean for the repair

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

We put weight on a tray before sealing it, for the same reason.

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Don’t stand toiletries on the seal
  • Wipe the joints dry after use
  • Clean the sealant gently and regularly
  • Run the extractor fan during and after showers

Leave the sealant to cure for the time we give you, normally around 24 hours.

Black mould in sealant isn’t just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.

What affects the price in Munlochy

We charge the same across the UK, including Munlochy. What changes the price is:

  • The type of damage
  • What the surface is made of
  • Where the damage is and how we get to it
  • How many items we do on one visit

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

Photographing the damage takes a minute. Please include:

  • What it’s made of, if you know
  • Details of any past repairs
  • The postcode, so we can plan the visit
  • One sharp close-up of the damage

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.