Blackburn with Darwen · England

Bath Resealing in Myerscough Smithy

Bath, shower and sink resealing with new mould-resistant silicone in Myerscough Smithy, carried out at your home and guaranteed for a year.

  • Black mould in the sealant
  • Stained silicone
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Myerscough Smithy?

Myerscough Smithy and the surrounding area

Myerscough Smithy is about 4 miles south-east of Longridge, in Blackburn with Darwen. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in all 42 towns and villages across Blackburn with Darwen. You can also see our page for Manchester, about 25 miles away.

Postcode districts we cover here: BB2. We also travel to Balderstone (1 mile north), Mellor Brook (1 mile south-east), Samlesbury (1 mile south-west), Osbaldeston (1 mile east) and Turner Green (1 mile south-west). Larger places within reach include Blackburn (4 miles south-east), Darwen (7 miles south-east), Mill Hill (4 miles south-east), Bastwell (4 miles east), Bank Hey (4 miles east) and Whalley Range (4 miles south-east).

Local landmarks in Myerscough Smithy

Our clients here include homes close to The Feilden's Arms, St Leonard's Church and St Mary's Roman Catholic Primary School, among other places. The closest station to Myerscough Smithy is Ramsgreave & Wilpshire station, roughly 3.5 miles east of the centre. Well-known places in the area include Ribchester Roman Museum (2.4 miles north-east) and Blackburn Royal Infirmary (4.3 miles south-east). Green spaces nearby include Brockholes.

Map of Myerscough Smithy © OpenStreetMap contributors

Bath resealing at your home in Myerscough Smithy

All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. Our technicians work on kitchen worktops & sinks, shower trays & enclosures and baths, and common reasons people get in touch are stained silicone and black spots in the silicone.

The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.

Roll-top bath being refinished by a Surface Doctor technician
Location
Myerscough Smithy (BB2)
County
Blackburn with Darwen
Cover
A year, on every repair
Price
Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

How it works

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take about two hours for a bath, and you can get on with other things while we are there.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Getting ready for the visit

  • Ensure the room can be ventilated
  • Tell us if there are stairs or a lift
  • Clear toiletries, mats and anything else from around the area

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Get a fixed price

Related advice

Honest limits

It helps to know what we can’t do:

  • Hollow or loose tiles
  • Movement in the bath or tray
  • Very wide gaps that need a trim

Send us pictures and we’ll tell you honestly before booking.

What we work on

  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms
  • Kitchen worktops & sinks
  • Baths

Different materials, different repairs

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Resealing in Myerscough Smithy: why it matters

Putting new silicone over old does not last. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • Free fixed quotes from pictures
  • Dust sheets down, tidy finish
  • Same prices wherever you are
  • Everything repaired in place

Take a look at our pricing.

Landlords, agents and businesses in Myerscough Smithy

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

What we are called out for in Myerscough Smithy

Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.

You may need us if you’ve spotted any of these:

  • A messy previous reseal
  • Damp near the bath
  • Black mould in the sealant
  • Gaps by the taps

Before you book anyone

  • How soon you can use it again
  • Whether the colour is mixed to match
  • What the guarantee covers, and for how long
  • What aftercare is recommended

10 questions to ask before booking

Keeping it looking good

Looking after the surface is easy, and it makes a real difference:

  • Keep bottles off the joints
  • Let steam out after showers
  • Wipe the joints dry after use
  • Run the extractor fan during and after showers

Use the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.

Mouldy sealant is more than a cosmetic problem; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

Myerscough Smithy: your questions answered

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Do you cover Myerscough Smithy?

Yes. We work across the UK and travel to Myerscough Smithy and the rest of Blackburn with Darwen. Send pictures and we will quote, or call 0345 017 0787.

Is repairing better than replacing?

Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

What if the damage is worse than the photos show?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Myerscough Smithy.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.