Na h-Eileanan Siar · Scotland
Bath Resealing in Na Gearrannan
Our technicians come to Na Gearrannan for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Sealant that’s split or lifting
- Leaks at the edges
- Mould you can’t clean out
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Bath resealing in Na Gearrannan, done in place
The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why many DIY jobs peel. If you are dealing with leaks at the edges and gaps by the taps, we can help, whatever the material.
In older homes in a village like Na Gearrannan, walls and floors can move a little, and that splits sealant. We fill the bath before sealing so the joint lasts.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Na Gearrannan (HS2)
- Area hub
- Na h-Eileanan Siar
- Cover
- One year on every repair
- Quotes
- A fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
The process
Arrival times are agreed in advance. On site, it takes a couple of hours for most jobs. The room is left tidy and ready to use once it has cured. In a village or hamlet like Na Gearrannan, access can be the only tricky part. Once on site, the job is the same as anywhere.
- The surrounding area is protected and the joints masked.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
- Open a window if you can
How to get a price
The quickest way to a price is to send two or three photos through our quote form or call us. We will say immediately whether it can be repaired.
Related advice
Also in Na Gearrannan
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Na Gearrannan, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
What we cannot put right
We will not take on work that will not last, so these are the limits:
- A bath or tray that moves, until its support is fixed
- Very wide gaps that need a trim
- Hollow or loose tiles
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
Common questions in Na Gearrannan
Do you cover villages like Na Gearrannan?
Yes, we cover the whole UK, villages included.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
How much does bath resealing cost in Na Gearrannan?
The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
My seal keeps tearing. Why?
Typically because the bath or tray moves. We seal baths full of water.
Why does mould come back so fast?
Generally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Na Gearrannan: what to know about resealing
Na Gearrannan (Gaelic: Garenin) is in Na h-Eileanan Siar. We travel to customers in Na Gearrannan and nearby villages, so there’s no workshop to go to. Na Gearrannan is one of 87 places in Na h-Eileanan Siar we cover.
Visits for bath resealing in HS2 are booked in the same way as anywhere else. We also travel to Carloway (1 mile south-east), Shawbost (4 miles north-east), Breasclete (5 miles south), Bragar (6 miles north-east) and Barabhas (10 miles north-east). Some remote addresses need extra planning, so call us to arrange it.
What’s near Na Gearrannan
Nearby you’ll also find Gearannon Blackhouse Village (less than half a mile north-west). The countryside around Na Gearrannan includes Loch Langavat.
Resealing in Na Gearrannan: why it matters
Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. Older homes around Na Gearrannan may have sizes and fittings that new pieces do not match. A repair keeps the original.
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
Why book with us
- Straight answers about what a repair can do
- One-year guarantee on every repair
- Most jobs done in one visit
- Same prices wherever you are
See our Full price list.
What we are called out for in Na Gearrannan
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning cannot get it all out.
The things clients generally mention when they call include:
- Stained silicone
- Unsealed corners
- Sealant that’s split or lifting
- Black spots in the silicone
What to look for in a quote
- Whether a trained technician does the job
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
- Aftercare advice
Prices and what affects them
Prices are worked out job by job, from your photos. The main factors are:
- What kind of damage it is
- Where the damage is and how we get to it
- The material and finish
- Whether we combine several jobs
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Before you send photos, a few simple things make all the difference:
- A close-up of the damage, in focus
- The material, if you know it
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath or shower
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Keep the joints dry
- Ventilate the bathroom well
- Clean the joints with a mild cleaner
- Keep bottles off the joints
Leave the sealant to cure for the time we give you, generally around 24 hours.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
