Somerset · England

Bath & shower resealing (mastic) in Nethercott, Somerset

Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Nethercott. Send pictures for a free, fixed quote.

  • Stained silicone
  • A messy previous reseal
  • Black mould in the sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Nethercott

What your bath or shower is made of matters

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Bath resealing at your home in Nethercott

We cut out all of the old sealant, deal with any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We work on basins & vanity units, wet rooms and baths, and people most often call us about unsealed corners and black spots in the silicone.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back.

Location
Nethercott (TA4)
Area hub
Somerset
Warranty
One year on every repair
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

FAQs for Nethercott

How long before I can shower?

You’ll get the curing time from us, normally around a day.

Do I need to be at home?

We need someone to let us in. You do not need to watch us work.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Can you reseal over the old silicone?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

How long does a reseal take?

A bath or shower generally takes a couple of hours. It then needs time to cure.

How quickly can you book me in?

We will give you dates with your quote. Tell us if you need it done quickly.

Do you come to Nethercott?

Yes. We cover the entire UK and come to Nethercott. Send us photos for a fixed quote, or call 0345 017 0787.

How much does bath resealing cost in Nethercott?

The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.

Covering Nethercott

Nethercott is about 7 miles north-west of Taunton, in Somerset. From the centre of Nethercott to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 640 towns and villages in Somerset.

Here we cover the TA4 postcode area. We also cover the places around Nethercott: Combe Florey (1 mile south-east), Rich's Holford (1 mile north), Lydeard St Lawrence (1 mile west), Westowe (1 mile west) and Ash Priors (2 miles south). Further out, we also cover Taunton (7 miles south-east), Bridgwater (10 miles east), Minehead (14 miles north-west), Burnham-on-Sea (14 miles north-east), Wellington (7 miles south) and Sydenham (11 miles east).

Local landmarks in Nethercott

Our customers here include homes close to Church of St Peter & St Paul. A little further out are Merrifield Children's Unit (3.4 miles south) and Blazes (1.3 miles south-east). Open spaces near Nethercott include Wills Neck.

Map of Nethercott © OpenStreetMap contributors

What we cannot put right

A repair isn’t right for every job, for example:

  • Gaps so wide they need filling or trims before sealing
  • Water damage behind the bath that needs a builder
  • A bath or tray that moves, until its support is fixed

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths
  • Kitchen worktops & sinks

Work for landlords and builders

We work for landlords, letting agents and housing providers in Nethercott as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

How the visit works

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a couple of hours, and we leave the room as we found it.

  1. We cut out and remove all of the old sealant.
  2. The joint is cleaned and any mould treated.
  3. The joint is dried thoroughly.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

How to prepare

  • Let us know about parking or access
  • Let us know if it has been repaired before
  • Move bottles, mats and clutter away from the area

Ask for a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Send photos for a quote

Read more

Resealing in Nethercott: why it matters

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. We charge the same wherever you are, so there’s no premium for Nethercott. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Nethercott

  • CHAS, Constructionline and SafeContractor accredited
  • A fixed quote before you book
  • No need to remove anything
  • No extra charge for your area

See our pricing.

DIY repairs versus a professional job

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

How to care for the repair

To keep it looking its best for years:

  • Reseal at the first sign of lifting
  • Give the seal a regular clean
  • Don’t stand toiletries on the seal
  • Dry the seal after bathing

Leave the sealant to cure for the time we give you, normally about a day.

Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.

Prices and what affects them

We price every job individually. The main factors are:

  • Where the damage is and how we get to it
  • Whether we combine several jobs
  • The material and finish
  • Whether old repairs or coatings need taking off

A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.

How to get a fixed price

It only takes a minute to photograph the damage. Try to send:

  • Natural light rather than flash
  • A wider photo showing the entire bath or shower
  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage

The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.