Somerset · England
Bath Resealing in Rich's Holford
Fixed-price bath resealing in Rich's Holford and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Missing sealant behind the taps
- Old sealant that looks dirty
- Leaks at the edges
Bath resealing in Rich's Holford without replacing anything
Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. Our technicians work on shower trays & enclosures, baths and wet rooms, and common reasons people contact us are gaps by the taps and an untidy old seal.
Every repair is covered by a one-year guarantee, wherever you are in Somerset.
- Where
- Rich's Holford (TA4)
- County
- Somerset
- Cover
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath or tray that moves, until its support is fixed
- Hidden water damage
- Very wide gaps that need a trim
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Baths
Why it’s worth resealing in Rich's Holford
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
Why book with us
- Everything repaired in place
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Fixed prices from your photos
Take a look at our prices page.
Covering Rich's Holford
Rich's Holford is about 8 miles north-west of Taunton, in Somerset. From the centre of Rich's Holford to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 640 towns and villages across Somerset.
Postcode districts we cover here: TA4. Other places close to Rich's Holford include Nethercott (1 mile south), Lydeard St Lawrence (1 mile south-west), Westowe (1 mile south-west), Combe Florey (2 miles south-east) and Coleford Water (2 miles west). We also work in nearby towns such as Taunton (8 miles south-east), Bridgwater (10 miles east), Minehead (13 miles north-west), Burnham-on-Sea (14 miles north-east), Wellington (8 miles south) and Sydenham (11 miles east).
What’s near Rich's Holford
A little further out are Merrifield Children's Unit (4.4 miles south) and Blazes (2.3 miles south). For a walk, there is Wills Neck.
How to care for the repair
After the repair has cured, a few habits help it last:
- Ventilate the bathroom well
- Clean the joints with a mild cleaner
- Reseal at the first sign of lifting
- Don’t stand toiletries on the seal
Good ventilation is the best protection, and dry the joints after bathing.
Damp below or loose tiles need checking quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.
Your questions about bath resealing in Rich's Holford
Can new silicone go over old?
We always remove the old sealant completely. New silicone won’t bond to old.
Why does my sealant keep splitting?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What areas do you cover?
Everywhere in the UK, Rich's Holford included. Travel is included in the price.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Why does mould come back so fast?
Mould needs moisture. Ventilation and drying keep it clean longer.
Materials and what they mean for the repair
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Baths
We fill the bath before sealing, so the joint is at its widest.
Places near Rich's Holford
Also in Rich's Holford
How the visit works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take a couple of hours, and we’ll keep you posted as we go.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
How to prepare
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Related advice
Landlords, agents and businesses in Rich's Holford
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
If you manage property in Rich's Holford, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
What bath resealing costs
Quotes are free and the price is fixed. What we take into account:
- Doing more than one item at once
- Access to the area
- The size and number of damaged areas
- The material and finish
Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
Most customers in Rich's Holford get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
