Shropshire · England
Bath Resealing for Orleton homes
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Orleton and across Shropshire. Send photos for a free, fixed quote.
- Silicone smeared on tiles
- Sealant that is split or lifting
- Black mould in the sealant
Bath resealing in Orleton, done in place
We reseal baths with them filled with water, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Typical jobs include black spots in the silicone and gaps by the taps, on wet rooms, baths and basins & vanity units.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Orleton (SY8)
- Region
- Shropshire
- Warranty
- 12 months on all our work
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Orleton: your questions answered
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Do you seal over the old sealant?
We always remove the old sealant completely. Fresh silicone doesn’t stick to old.
Do you cover the whole of Shropshire?
All of Shropshire, and the rest of the UK. There’s no extra charge for travel.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
How do I get a price for bath resealing in Orleton?
Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Open a window after bathing
- Ventilate the bathroom well
- Wipe the joints dry after use
- Don’t stand toiletries on the seal
Keep the room well ventilated, and dry the joints after bathing so mould struggles to take hold.
Mouldy sealant is more than a cosmetic problem. Resealing early keeps water out of the walls and floor.
Why reseal now?
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. The price reflects the work involved, not where you live. You will see the full price before booking.
Why book with us
- Everything repaired in place
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page.
Our work in Orleton
Orleton is about 17 miles north of Hereford, in Shropshire. From the centre of Orleton to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Orleton is one of 433 towns and villages in Shropshire where we work. You can also see our page for Birmingham, about 38 miles away.
We cover every part of SY8. That includes homes on Mortimer Close, Claremont Orchard and Mortimer Drive. Close by, we cover Comberton (1 mile north-east), Broad Green (1 mile west), Woofferton (2 miles north-east), Richards Castle (2 miles north) and Mitnell (2 miles north). We also work in nearby towns such as Ludlow (5 miles north), Craven Arms (10 miles north), Cleobury Mortimer (12 miles north-east), Clun (15 miles north-west), East Hamlet (5 miles north) and Halford (11 miles north).
Around Orleton
Our customers here include homes close to Orleton CofE Primary School, The Maidenhead pub and Church of St George. Orleton’s nearest station is Ludlow station, roughly 5 miles north. Nearby you’ll also find Earthworks SE of Lower Ashton Farm (2.4 miles south-east) and Ludlow Community Hospital (5.1 miles north). Open spaces near Orleton include Dionscourt Hill.
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to a couple of hours, including clearing up.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Getting a price
Email us photos of the damage and one of the entire item, with your SY8 postcode, and we will come back with a fixed quote.
Advice
Repairs by material
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Also near Orleton
More services for Orleton
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
If you manage property in Orleton, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
When to call us in Orleton
Sealant doesn’t last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.
You may need us if you’ve spotted any of these:
- Discoloured, yellow sealant
- Black mould in the sealant
- An untidy old seal
- Sealant that’s split or lifting
Questions to ask before booking
- What preparation is included
- How changes to the job are handled
- If travel is included in the price
- Who turns up on the day
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Hollow or loose tiles
- Gaps too big for silicone alone
- A flexing bath
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
About our accreditations · Every repair comes with a one-year guarantee.
