Bridgend · Wales
Bath Resealing for Penprysg homes
Bath, shower and sink resealing with new mould-resistant silicone at your home in Penprysg, with a one-year guarantee on every repair.
- Mould you can’t clean out
- Missing sealant behind the taps
- Stained silicone
About Penprysg
Penprysg is about 4 miles north-east of Bridgend, in Bridgend. From the centre of Penprysg to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Penprysg is one of 91 places in Bridgend we cover.
All of CF35 is covered. Jobs here include addresses on Pentwyn Road, Penybont Road and Lletai Avenue and the roads around them. Penprysg sits on or near the A473, so getting to you is simple. Other places close to Penprysg include Brynnau Gwynion (1 mile east), Brynna (2 miles east), Bryncae (2 miles east), Dolau (2 miles east) and Llanharan (2 miles east). Further out, we also cover Bridgend (4 miles south-west), Maesteg (9 miles north-west), Porthcawl (9 miles west), Newcastle Higher (4 miles south-west), Ynysawdre (4 miles west) and Cefn Glas (5 miles west).
Local landmarks in Penprysg
We visit homes around Pencoed Primary School, Pencoed Comprehensive School and Little Penybont Arms and the streets around them. Penprysg’s nearest station is Pencoed station, roughly 0.6 miles south-west of the centre. Further afield, we also cover the area around Llanilid Castle (1.1 miles south-east) and Designer Outlet Bridgend (3.5 miles west). Open spaces near Penprysg include Pen Coed-y-mwstwr and Nant Dyfrgi Pool.
How we handle bath resealing in Penprysg
Baths are resealed with water in them, so the joint opens fully, so the seal doesn’t tear when the bath is first used. Typical jobs include old sealant that looks dirty and water getting behind the bath or tray, on shower trays & enclosures, basins & vanity units and kitchen worktops & sinks.
A one-year guarantee comes as standard.
- Location
- Penprysg (CF35)
- Region
- Bridgend
- Warranty
- One year on every repair
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take about two hours for a bath, and we leave the room as we found it.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, for the same reason.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
For landlords and businesses
Landlords, letting agents and housing providers in Penprysg use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
If you manage property in Penprysg, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
What we cannot put right
In fairness, some problems need a different fix:
- Gaps so wide they need filling or trims before sealing
- Water damage behind the bath that needs a builder
- A flexing bath
Send us photos and we will tell you honestly before booking.
What we work on
- Basins & vanity units
- Wet rooms
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Penprysg: your questions answered
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Why does the silicone keep cracking?
Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How long does resealing take?
Around two hours for a bath, plus curing time.
How long before I can shower?
Normally about a day later. We’ll tell you the exact time.
What areas do you cover?
Across the UK, so Penprysg is covered. Our prices are the same everywhere.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why Penprysg clients choose us
- One-year guarantee on every repair
- Fixed prices from your pictures
- No extra charge for your area
- We will tell you if it’s not worth repairing
Read our pricing.
Prices and what affects them
You won’t pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- Doing more than one item at once
- What kind of damage it is
- The colour and finish to match
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- A wider photo showing the whole bath or shower
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- The material, if you know it
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You will get a fixed price, not an estimate.
Signs you need bath resealing in Penprysg
Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.
Send us a picture if you notice any of these:
- Black spots in the silicone
- Sealant that’s split or lifting
- Gaps by the taps
- Silicone smeared on tiles
Before booking anyone
- Who turns up on the day
- How the colour is matched
- What preparation is included
- How to look after the finish
Also in Penprysg
About our accreditations · Every repair comes with a one-year guarantee.
