Peterborough · England
Bath Resealing in Peterborough
Local bath resealing for Peterborough: photo quotes, tidy work and a year’s guarantee.
- Sealant that’s split or lifting
- A messy previous reseal
- Gaps by the taps
About our bath resealing in Peterborough
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, as one neat, continuous bead. Whether it’s a messy previous reseal and sealant that’s split or lifting, we can generally put it right, on basins & vanity units, shower trays & enclosures and wet rooms alike.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Location
- Peterborough (PE2, PE1, PE4, PE7)
- Area hub
- Peterborough
- Guarantee
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Aftercare is simple:
- Do not stand toiletries on the seal
- Ventilate the bathroom well
- Clean the joints with a mild cleaner
- Dry the seal after bathing
Let it cure fully before using the bath or shower, normally around 24 hours.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, and we will say if you need a builder or plumber.
Landlords, agents and businesses in Peterborough
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Our work in Peterborough
Peterborough is in England. Across the PE2 area, a technician comes to you. Our repair technicians cover 18 places across Peterborough. Our jobs stretch from Peterborough to Birmingham (69 miles away).
All of PE2, PE1, PE4 and PE7 is covered, from the main roads to the quietest streets. From Marchment Square, Station Road and Burghley Square or anywhere nearby, we can come to you. Peterborough is on the A1 and A15, so it’s easy for us to reach. Neighbouring places we cover include Boroughby (1 mile east), Woodston (1 mile south), Westwood (1 mile north-west), Longthorpe (1 mile south-west) and Eastgate (1 mile east). We also work in nearby towns such as Orton Waterville (3 miles south-west), Alwalton (3 miles south-west) and Castor (4 miles west).
Landmarks near Peterborough
Locally, our jobs take us to homes close to The Boardwalks, The Crown Public House and Deacon's School, among other places. Also close by are Aylestone Business and Enterprise College (0.7 miles north-east), West Town Primary Academy (less than half a mile east) and St Luke's Church (under half a mile north). Peterborough has its own railway station: Peterborough station. Well-known places in the area include Queensgate shopping centre (0.6 miles east) and Peterborough District Hospital (less than half a mile east). The countryside around Peterborough includes Woodston Ponds and Orton Mere.
Repairs by material
Baths
We fill the bath before sealing, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Resealing in Peterborough: why it matters
Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- Every repair guaranteed for a year
Take a look at our full price list.
What bath resealing costs
A fixed quote means you know the cost before you book. We look at:
- Access to the area
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
What we do, step by step
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes about two hours for a bath, and the room is left clean and tidy.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Let us know if it has been repaired before
How to get a price
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Related advice
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Do you need bath resealing in Peterborough?
Sealant does not last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.
Send us a photo if you notice any of these:
- Missing sealant behind the taps
- Discoloured, yellow sealant
- Silicone smeared on tiles
- Gaps in the seal
Comparing quotes
- What prep work is covered
- How long the guarantee is and what it covers
- How long it needs to cure
- A fixed quote, and whether VAT is included
Your questions about bath resealing in Peterborough
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Can new silicone go over old?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
How long does silicone take to cure?
Normally about a day later. We confirm before we leave.
Can you redo someone else’s repair?
Normally, yes. The old repair comes out first, so let us know about it.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Other services in Peterborough
About our accreditations · Every repair comes with a one-year guarantee.
