Plymouth · England
Bath Resealing in Plymouth
Our technicians come to Plymouth for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Stained silicone
- Leaks at the edges
- Sealant that’s split or lifting
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Bath resealing in Plymouth, done in place
Resealing is quick, but it transforms the look. Clean, white joints make a bathroom look cared for, and they keep water out. If you’re dealing with silicone coming away from the tiles and old sealant that looks dirty, we can typically put it right.
Your repair is guaranteed for a year, as with every job we do.
Prices and what affects them
You’ll know the full cost before you book. We take into account:
- The colour and finish to match
- Previous DIY repairs that have to come out
- How many areas need work
- Whether it’s a chip, crack, burn or wear
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send pictures for a quote
Two or three clear photos are typically enough. It helps if you send:
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- A picture taken from further back
- What it’s made of, if you know
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, include your postcode and send them over. You will get a fixed quote, not an estimate.
Our work in Plymouth
Plymouth is in England. Jobs in Plymouth are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in all 59 towns and villages across Plymouth, from the larger towns to small villages.
We work across the PL6, PL5, PL9 and PL7 postcode area and the streets around it. Streets in the area include Freedom Square, Smeaton Square and Market Way. Plymouth is on the A38 and A374, which makes it straightforward to reach. Neighbouring places we cover include Hartley (1 mile north), Compton (1 mile east), Mannamead (1 mile south-west), Mutley (1 mile south-west) and Peverell (1 mile west). Further out, we also cover Burraton (5 miles west), St Budeaux (3 miles west), Plympton St Maurice (4 miles east), Plymstock (3 miles south-east), Sherford (4 miles south-east) and St Stephens (5 miles west).
What’s near Plymouth
Typical jobs here are in homes near Compton Inn, Church of Emmanuel and Central Park and the streets around them. Also close by are Efford Library (0.8 miles east), Plymouth High School for Girls (0.7 miles south-west) and Compton CofE Primary School (within half a mile north). The closest station to Plymouth is Plymouth station, about 1 mile south-west. A little further out are Freedom Fields Hospital (0.7 miles south) and Plymouth Castle (1.6 miles south).
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to about two hours for a bath, including clearing up.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Ensure the area is dry
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
How to get a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Related advice
What else we do in Plymouth
Do you need bath resealing in Plymouth?
Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.
Look out for any of the following:
- Water getting behind the bath or tray
- Missing sealant behind the taps
- Sealant that is split or lifting
- An untidy old seal
What to look for in a quote
- Whether the price covers travel
- How to care for the finish
- How soon you can use it again
- How changes to the job are handled
Plymouth questions
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Do you seal over the old sealant?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
How do I stop mould in sealant?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
My seal keeps tearing. Why?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
How long does resealing take?
Most reseals take about two hours. It then needs time to cure.
Do you cover Plymouth?
We do. Technicians travel to Plymouth from across the region, with no extra charge for travel.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We work for landlords, letting agents and housing providers in Plymouth as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Why it’s worth resealing in Plymouth
Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Plymouth
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
- A fixed quote before booking
- Every repair guaranteed for a year
Read our pricing.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Clean the sealant gently and regularly
- Run the extractor fan during and after showers
- Do not stand toiletries on the seal
- Open a window after bathing
Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.
Black mould in sealant is not just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
About our accreditations · Every repair comes with a one-year guarantee.
