West Lothian · Scotland
Bath & shower resealing (mastic) in Polbeth, West Lothian
Local bath resealing for Polbeth: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Unsealed corners
- Silicone smeared on tiles
- Sealant that’s split or lifting
Bath resealing in Polbeth without replacing anything
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, as one neat, continuous bead. We work on baths, shower trays & enclosures and wet rooms, and common reasons people get in touch are a messy previous reseal and discoloured, yellow sealant.
Whatever the size of the job, it’s backed by a one-year guarantee in Polbeth and across West Lothian.
- Location
- Polbeth (EH55)
- County
- West Lothian
- Guarantee
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Landlord and trade work in Polbeth
Landlords, letting agents and housing providers in Polbeth use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
What we’re called out for in Polbeth
A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.
Signs it’s time to call us include:
- Gaps by the taps
- Gaps in the seal
- Black spots in the silicone
- Discoloured, yellow sealant
What to look for in a quote
- If travel is included in the price
- How to care for the finish
- Is the price fixed, and does it include VAT?
- How long it needs to cure
How we price bath resealing
Prices are worked out job by job. The main factors are:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
We charge the same wherever you are, with no extra for Polbeth. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- What it’s made of, if you know
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Our work in Polbeth
Polbeth is about 3 miles south-west of Livingston, in West Lothian. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover 58 places in West Lothian, from the larger towns to small villages. We work right across the region, from Polbeth to Edinburgh (about 15 miles away).
Our visits in EH55 work the same way as everywhere else we cover. Local streets include Polbeth Avenue, Polbeth Place and Limefield Road, and we cover them all. We also cover the places around Polbeth: Mossend (1 mile west), West Calder (1 mile south-west), Bellsquarry (1 mile north-east), Adambrae (1 mile north-east) and Dedridge (2 miles north-east). We also work in nearby towns such as Livingston (3 miles north-east), Bathgate (4 miles north-west), Linlithgow (8 miles north), Whitburn (5 miles west), East Calder (5 miles north-east) and Broxburn (6 miles north-east).
Landmarks near Polbeth
We visit homes around West Calder and the streets around them. The nearest railway station is West Calder station, roughly 0.8 miles south-west of the centre. Nearby you will also find Livingston Designer Outlet (2 miles north-east) and Almond Valley Heritage Centre (1.7 miles north). Open spaces near Polbeth include Dechmont Law.
Nearby places to Polbeth
More services for Polbeth
The process
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes about two hours for a bath, and we leave the room as we found it.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- We dry the joint thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
Get a quote
Send us a photo of the damage and one of the entire item, and tell us you’re in Polbeth, and we’ll reply with a fixed quote.
Advice
Why it’s worth resealing in Polbeth
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Polbeth
- Every repair guaranteed for a year
- Work done at your home or business
- Straight answers about what a repair can do
- Most jobs done in one visit
See our full price list.
FAQs for Polbeth
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across West Lothian.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long before I can shower?
Normally about a day later. We will tell you the exact time.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
How long will it take?
Around two hours for a bath, plus curing time.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What your bath or shower is made of matters
Shower trays
We put weight on a tray before sealing it, for the same reason.
Baths
Baths are resealed with water in them, so the joint is at its widest.
When a repair is not the answer
In fairness, there are a few things a repair won’t fix:
- Gaps so wide they need filling or trims before sealing
- Rotten walls or floors behind the bath
- A flexing bath
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Kitchen worktops & sinks
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Baths
About our accreditations · Every repair comes with a one-year guarantee.
