Luton · England

Bath Resealing for Putteridge homes

Bath resealing across Putteridge and nearby, done in a single visit in most cases.

  • A messy previous reseal
  • Missing sealant behind the taps
  • Water getting behind the bath or tray
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Putteridge

What bath resealing costs

You will not pay by the hour. The price depends on:

  • Doing more than one item at once
  • Unusual colours or finishes
  • The type of damage
  • Where the damage is and how we get to it

We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your pictures

Two or three clear pictures are usually enough. It helps if you send:

  • Any earlier repairs or coatings
  • Something in shot to show the size
  • One sharp close-up of the damage
  • The material, if you know it

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Bath resealing at your home in Putteridge

Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. If you’re dealing with gaps in the seal and discoloured, yellow sealant, we can typically put it right.

You get a one-year guarantee, the same in Putteridge as everywhere else we work.

Area
Putteridge (LU2)
Area hub
Luton
Cover
12 months on all our work
Quotes
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Landlords, agents and businesses in Putteridge

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

We work for landlords, letting agents and housing providers in Putteridge as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Putteridge and nearby

Putteridge is about 2 miles east of Luton, in Luton. Across the LU2 area, we carry out the work at your property. Putteridge is one of 53 towns and villages in Luton where we work. Our nearest city page is London, about 31 miles away.

Here we cover the LU2 postcode area. Streets in the area include Green Lane, Cannon Lane and Curlew Road, and we cover them all. Nearby, we also work in Mangrove Green (1 mile south-east), Lilley (2 miles north), The Flints (2 miles north-east), Great Offley (2 miles north-east) and Ley Green (3 miles east). Within a short drive, we also cover Limbury (3 miles west), Dallow (3 miles south-west), Saints (3 miles west), Marsh Farm (3 miles west), Lewsey Farm (5 miles west) and Lewsey Park (4 miles west).

What’s near Putteridge

Typical jobs here are in homes near The Ashcroft Arms, Parish Church of St Thomas and Putteridge Primary School. Also close by are Queen Elizabeth School (1 mile south) and Wardown Park (1.7 miles south-west). For rail, the closest station is Luton station, about 2 miles south-west of the centre. Nearby you will also find Keech Hospice Care (2.8 miles north-west) and Luton Castle (2.5 miles south-west). Not far away are Warden Hill and Pegsdon Hills.

Map of Putteridge © OpenStreetMap contributors

Resealing in Putteridge: why it matters

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why Putteridge customers choose us

  • Most jobs done in one visit
  • Free fixed quotes from pictures
  • One price list for the whole UK
  • Straight answers about what a repair can do

Take a look at our pricing.

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow about two hours for a bath from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. First we strip out every bit of the old mastic.
  2. We clean the joint and treat any mould.
  3. We make sure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Ensure the room can be ventilated
  • Keep pets and children out of the room while we work

How to get a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a free quote

Related advice

Can I fix it myself?

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Repairs by material

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Baths

We fill the bath before sealing, so the joint is at its widest.

Questions from Putteridge

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you quote from pictures?

Nearly always. If photos don’t show enough, we will ask for another angle.

What information do you need?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Is the work guaranteed?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

My seal keeps tearing. Why?

Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can I add another job to the visit?

Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Signs you need bath resealing in Putteridge

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.

Send us a photo if you notice any of these:

  • Water getting behind the bath or tray
  • Mould you can’t clean out
  • Old sealant that looks dirty
  • An untidy old seal

What your quote should include

  • Whether the price covers travel
  • What prep work is covered
  • How long the guarantee is and what it covers
  • Whether a trained technician does the job

How to compare quotes

Aftercare tips

After the repair has cured, a few habits help it last:

  • Keep the joints dry
  • Use the extractor fan
  • Clean the sealant gently and regularly
  • Replace the seal when mould sets in

Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.

Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.